Glock 19 Gen 5 MOS Footprint: 100 Red Dots, 1 Direct Fit

By CaliberAPI · · 3 min read

Last verified October 27, 2026

glockbuying guideglock mos

The Glock 19 Gen 5 MOS fits 100 red dot optics in our data. What most lists leave out: only one of them bolts to the slide directly. The MOS system works with adapter plates, so the other 99 mount through the right plate. The slide is cut for the MOS plate standard, not for any optic footprint. So the real question is not which red dot fits a Glock 19 MOS. It is which MOS plate you need.

How does the Glock MOS system work?

MOS stands for Modular Optic System. Instead of milling the slide for one optic footprint, Glock cuts it for numbered adapter plates. Each plate presents a different footprint on top, and each MOS plate set holds one numbered plate. Glock’s own MOS adapter plate page lists four for a slide like the 19’s: plate 01 for Docter, Meopta, Insight, Vortex and Burris optics, 02 for Trijicon, Holosun (except the 509) and Ameriglo, 03 for C-More, and 04 for Leupold and EOTech. You match the plate to your optic, not the slide to your optic. It also means you cannot skip the plate. The slide has no optic footprint of its own to bolt to.

What mounts to the Glock 19 MOS directly?

One optic in our data. The Holosun SCS-M-GR. Holosun built the SCS line to sit in the MOS cut with no plate, using the slide’s own pattern and a solar panel instead of a battery tray. It is the only optic on this gun that skips the plate entirely. If you want zero plates and the lowest possible mounting height on this pistol, the SCS-M-GR is the one optic that delivers it. Everything else needs a plate underneath.

What fits with a plate?

Almost everything else, through six MOS plates in our data. Four are Glock’s: 02 carries the 35 RMR-pattern optics, 04 the 16 DeltaPoint Pro optics, 01 the 6 Docter optics and 03 the one C-More optic. Glock makes no ACRO or Shield plate, so those come from the optic makers: Aimpoint’s Glock MOS ACRO mount plate carries the 7 ACRO optics, and Shield Sights’ MOS mounting plate, “designed for the SHIELD footprint”, carries the 34 RMSc optics. A short sample: the Aimpoint ACRO P-2, the Trijicon RMR and SRO, the Holosun 507C, the Burris FastFire 3, the Vortex Venom and the Bushnell RXC-200. The full list of 99, each with a source and each marked as a plate fit, is on the Glock 19 Gen 5 MOS page.

So which one should you actually buy?

Decide what goes on top first, then buy the plate for it. For most people running a carry or duty 19, an enclosed emitter makes sense, because the MOS cut leaves the area around the optic exposed to lint and pocket grit. The Aimpoint ACRO P-2 on Aimpoint’s MOS plate is the durable pick, and you pay for it. If you want lighter and far cheaper, the Holosun 507C on Glock’s plate 02 covers most needs for a fraction of the price. If you never want to think about a plate again, the Holosun SCS-M-GR is your only direct option. The constraint is always the plate, so confirm the plate exists for your optic before you buy the optic.

The Glock 19 Gen 5 MOS is one of the most flexible carry guns you can buy, and that flexibility comes entirely from the plate system. It is also the pistol people get wrong most often, because they read a list of 100 optics and assume they all bolt on. They do not. One does. Pick the optic, buy its plate, and torque it to Glock’s spec. The full cited list, with direct and plate fits marked separately, is on the pistol page.

Frequently asked

How many red dots fit the Glock 19 Gen 5 MOS?

100 in our dataset. One mounts directly, the Holosun SCS-M-GR. The other 99 mount through a MOS adapter plate: Glock's own plates 01 (Docter), 02 (RMR), 03 (C-More) and 04 (DeltaPoint Pro), Aimpoint's MOS plate for the ACRO, or Shield Sights' MOS plate for the Shield footprint.

Does the Glock 19 MOS need an adapter plate?

For almost every optic, yes. The MOS slide is cut for plates, not for an optic footprint. Only the Holosun SCS line sits in the cut directly. Every other red dot needs the matching MOS plate underneath it.

What is the best red dot for a Glock 19 MOS?

It depends on the plate you want. The Aimpoint ACRO P-2 is the durable enclosed pick, on Aimpoint's own MOS plate. The Holosun 507C on Glock's plate 02 is the value choice. The Holosun SCS-M-GR is the only no-plate option.

Can I mount a Trijicon RMR on a Glock 19 MOS?

Yes, through Glock's MOS adapter plate 02, which Glock lists for Trijicon, Holosun (except the 509) and Ameriglo optics. The RMR does not bolt to the slide. It bolts to the plate, and the plate bolts to the slide.