RMR vs DeltaPoint Pro: 35 Optics, 116 Pistols
By CaliberAPI · · 22 min read
Last verified October 27, 2026
The RMR is the optic footprint the most adapter plate systems on this site present, 25 of 31, and the DeltaPoint Pro is next at 20, which makes the comparison between them unusual: through plates the RMR reaches 116 pistols and the DeltaPoint Pro reaches 107, every one of them among the RMR’s 116, so on a plate gun the real choice is the optic catalogue, where the RMR carries 35 pages and the DeltaPoint Pro carries 16.
Counting the slides milled for each pattern as well, the RMR reaches 133 of the 223 pistols in this dataset and the DeltaPoint Pro reaches 125, with 113 in common. The DeltaPoint Pro’s milled count is no longer a handful: SIG describes the PRO cut on its P320 slides as “a SIG SAUER Electro-Optics ROMEO1PRO and Delta Point Pro footprint” (sigsauer.com), so all 17 P320s count as cut for it. Only 6 of them also reach the RMR, through the C&H Precision and Outer Impact plates whose makers list those models. Sixteen pistols take an RMR optic and not a DeltaPoint Pro one: six slides milled for the RMR alone, the two Archon models, sold with an RMR cut as one option, and eight plate guns whose plate makers list an RMR plate but no DeltaPoint Pro plate. Twelve run the other way: the FN 309 MRD, milled for the DeltaPoint Pro alone, and the 11 P320s that no plate maker here names.
Every figure below is recomputed from the published export bundle, version 2026-11-03: 223 launchable pistols, 112 optic pages over 151 SKUs, and 42 footprint and plate-system records of which 31 are plate systems. The full optic and pistol lists live on the RMR hub and the DeltaPoint Pro hub; nothing below reprints them.
The two patterns side by side
| RMR | DeltaPoint Pro | |
|---|---|---|
| Optic pages | 35 | 16 |
| Individual SKUs behind those pages | 49 | 17 |
| Optic brands | 8 | 5 |
| Enclosed emitter pages | 4 | 5 |
| Pages flagged verified | 35 | 16 |
| Pistols with the pattern milled into the slide | 18 | 23 |
| Pistols that reach it through a plate | 116 | 107 |
| Total pistols reached | 133 | 125 |
| Plate systems that present it | 25 of 31 | 20 of 31 |
| Mounting type | screw through | screw through |
| Screws | 2 | 2 |
| Recoil sockets | 2 | 4 |
The DeltaPoint Pro’s milled and plate rows overlap by the 5 SIG P320s that Outer Impact lists for its plate, which is why 23 and 107 come to 125 distinct pistols; the RMR’s 18 and 116 do not overlap at all.
Two rows carry the whole decision. The plate-system row is 25 of 31 against 20 of 31, the two highest on the site. The optic-page row is 35 to 16, better than two to one, and the SKU row widens that to nearly three to one.
Why the plate side is so close, and where it splits
The 42 footprint and plate-system records here split into 11 true footprints and 31 plate systems. A plate system is not a footprint: the plate you fit is what presents a footprint to the optic, which is why a Glock MOS slide has no footprint of its own. Counting how many of those 31 systems carry a plate for each true footprint, as each plate maker lists it, ranks the patterns by access:
| Footprint | Plate systems presenting it |
|---|---|
| RMR | 25 |
| DeltaPoint Pro | 20 |
| Docter | 18 |
| RMSc | 15 |
| ACRO | 12 |
| Holosun K | 10 |
| C-More STS | 9 |
| Holosun 509T | 8 |
| A-CUT | 0 |
| SIG-LOC Compact | 0 |
| SIG ROMEO3 MAX/XL | 0 |
The RMR misses five systems, all of them kits whose maker lists only a few patterns: the Beretta APX A1 Carry, 80X and 90-Series ACRO kits, the Kimber KDS9c plates and the single plate that ships with the Canik TP9 Elite Combat. The DeltaPoint Pro misses those five and five more, including the C&H Precision P320 plates, HK’s own VP9A1 plates, the Kimber 2K11 and the CZ Shadow 2 OR, whose one C&H plate is an RMR plate. Even the RMSc, which has by far the most milled slides at 81, misses 16 systems, among them the C&H plate sets for the FN 509, CZ P-10, HK VP9 and M&P CORE.
Checked pistol by pistol rather than inferred from the totals, every one of the 107 pistols that reach a DeltaPoint Pro optic through a plate is among the 116 that reach an RMR optic through a plate. The RMR’s plate set spans 14 brands: 18 Glock, 16 Springfield Armory, 14 Smith and Wesson, 12 FN America, 8 Heckler and Koch, 8 Walther, 7 CZ-USA, 7 Taurus, 7 Beretta, 6 SIG Sauer, 4 Canik, 3 Staccato, 2 Kimber and 1 Ruger. The nine outside the DeltaPoint Pro set are the two Kimber 2K11s, the CZ Shadow 2 OR and Shadow 2 Compact OR, the three HK VP9A1 models, the Canik TTI Combat and the SIG P320 X-Five SXG.
The uniformity goes further than the set. Grouped by how many optics of each pattern a pistol can reach, all 223 pistols fall into exactly four buckets and there is no variation inside any of them:
- 113 pistols at 35 RMR and 16 DeltaPoint Pro. The plate guns that reach both, the 6 plate-listed SIG P320s and the 3 Glock Gen6 models among them, plus the Ruger RXM, the Shadow Systems MR920, the SIG P385 and the two CZ DUTY models, the five slides milled for both patterns.
- 20 pistols at 35 RMR and 0 DeltaPoint Pro. The Anderson Kiger-9C Pro, the Lone Wolf Dusk 19 and LTD19 V1, the Tisas PX-9 Gen3 Duty and PX9 Gen3 O-R Carry and the Canik TP9SFx, all milled for the RMR and nothing else; the Archon Type B and Type D, sold with an RMR cut as one of Archon’s options; and eight plate guns whose plate makers list an RMR plate and no DeltaPoint Pro plate: the Kimber 2K11 Target OR and 2K11 Comp, the CZ Shadow 2 OR and Shadow 2 Compact OR, the three HK VP9A1 models and the Canik TTI Combat. The DeltaPoint Pro is not on the table for any of the 20.
- 12 pistols at 0 RMR and 16 DeltaPoint Pro. The FN 309 MRD, milled for the DeltaPoint Pro alone (fnamerica.com), and the 11 SIG P320s that no plate maker here lists, such as the P320 XFull, which reach exactly the 16 DeltaPoint Pro pages on SIG’s own cut and nothing else.
- 78 pistols at 0 and 0. Covered in its own section below.
Not one pistol in the dataset sees 35 against 14, or 34 against 15, or any other pairing. If you own a plate gun that reaches both, the question “which of these two patterns does my pistol prefer” has no answer, because your pistol does not have a preference. Both plates come from the same plate maker’s list. Beretta, for one, sells its 90-Series plates labelled by the footprint they present, including a kit named for the Leupold footprint and one named for the Trijicon footprint. C&H Precision lists both patterns for the S&W M&P CORE, the FN 509, the CZ P-10 and the HK VP9. Springfield covers both in its AOS system, its Echelon pin sets and its XD OSP plate set. The pattern holds through the Taurus TORO kit, Staccato’s HD HOST kit, the Walther PDP plate sets, Glock’s own MOS plates and Outer Impact’s modular adapters for the SIG P320, the Canik METE and the Ruger factory plate guns.
That reach is also why this pair is the backbone of the catalogue. The 35 and the 16 add to 51 of the 112 optic pages here, and 66 of the 151 SKUs. Close to half of every optic on this site sits on one of these two patterns.
The 78 pistols where this question does not arise
The last bucket matters because it is 35 percent of the dataset. Eighty-one of the 223 pistols cannot reach an RMR or a DeltaPoint Pro optic at all. Almost all of them are slides milled directly for a micro pattern, with no plate pocket to put anything else in:
- 54 pistols accept the RMSc pattern and nothing else, and each reaches exactly 34 optic pages, the full RMSc list.
- 18 pistols accept the RMSc plus the Holosun K pattern, and each reaches exactly 40, the RMSc 34 plus the 6 Holosun K pages.
The other five are a K-only slide (the SIG 1911-XCarry) and four plate guns whose plate makers list no RMR or DeltaPoint Pro plate for them: the Kimber KDS9c, the Beretta APX A1 Carry, the Beretta 80X Cheetah and the Canik TP9 Elite Combat. The micro-cut guns are the catalogue floor: 34 optics against a dataset median of 58 per pistol. If your slide is one of the 78, the RMR against DeltaPoint Pro question is not a decision you get to make, and the comparison that matters to you is on the RMSc hub and the Holosun K hub instead. It also explains why the RMR’s 133 looks small against the RMSc’s 135: the RMR lives on plates and full-size slides, and the micro market is not milled for it.
What is actually in the 35 and the 16
With the pistol side settled, everything turns on the optic catalogue, and the two lists are built very differently.
The RMR, 35 pages across 8 brands: Holosun 16, Swampfox 5, Trijicon 4, Primary Arms 3, Meprolight 3, Canik 2, Bushnell 1, Riton 1.
The DeltaPoint Pro, 16 pages across 5 brands: SIG Sauer 4, Bushnell 4, Vortex 4, EOTech 2, Leupold 1.
Three things fall out of those two lines.
First, the RMR’s lead is half one brand. Holosun alone accounts for 16 of the 35, close to half the pattern, through the 507C, 407C, 507Comp and 508T families. Strip Holosun out and the RMR carries 19 pages against the DeltaPoint Pro’s 16, which is close to a tie. The RMR is not twice the pattern; it is a pattern one very prolific maker has adopted twice over.
Second, there is zero model overlap, and the brand gates run in opposite directions. No optic page in this dataset sits on both patterns, so switching patterns always means switching products. Seven brands sell on the RMR and not the DeltaPoint Pro: Trijicon, Holosun, Swampfox, Meprolight, Primary Arms, Riton and Canik. Four sell on the DeltaPoint Pro and not the RMR: Leupold, EOTech, Vortex and SIG Sauer. Exactly one brand, Bushnell, sells on both, and even there the split is lopsided: one RMR page, the RXM-300, against four DeltaPoint Pro pages including the RXS-10 and the RXS-100.
Widen that to the whole site and it sharpens into a buying rule. Of the 19 optic brands here, five sell on exactly one pattern and nowhere else. Trijicon is RMR-only, which is the pattern its own RMR Type 2 named, alongside the SRO, the RMR HD and the enclosed RCR, whose mounting system keeps the pattern. Leupold and EOTech are both DeltaPoint Pro-only: the DeltaPoint Pro itself and the two EFLX pages, which retailers list explicitly as DeltaPoint Pro footprint sights. So picking the RMR costs you Leupold and EOTech entirely, and picking the DeltaPoint Pro costs you Trijicon entirely. If a specific brand is the reason you are buying, the brand picks the pattern and there is nothing left to decide.
Third, the DeltaPoint Pro is denser per page. The 35 RMR pages expand to 49 SKUs, so an average RMR page covers 1.4 variants; the 16 DeltaPoint Pro pages expand to 17, near one each. In practice the RMR’s extra SKUs are reticle and dot-size variants of models you have already seen, such as the five RMR Type 2 SKUs on one page, while the DeltaPoint Pro list is 16 distinct designs.
The enclosed emitter inversion
Here is the one place where the smaller catalogue wins outright, and it is the single most useful finding for a carry gun.
An enclosed emitter optic seals the LED behind the front lens, so lint, rain and snow cannot settle on it. Thirty-one of the 112 optic pages on this site are enclosed. Split by pattern, the DeltaPoint Pro carries 5 enclosed pages of its 16, 31 percent, and the RMR carries 4 of 35, 11 percent. The smaller list has more sealed options in absolute count as well as in share, and that is the reverse of what a two-to-one page advantage would predict.
The DeltaPoint Pro five are the Bushnell RXE-MR1, the EOTech EFLX-CE, the SIG Romeo-X Enclosed Pro, the Vortex Defender-ST Enclosed Solar and the Vortex Venom Enclosed, which Vortex’s retail listings describe as a DeltaPoint Pro footprint sight. The RMR four are the Trijicon RCR, the Meprolight MPO PRO-F, the Primary Arms PLx HTX-1 and the Canik PHANTOM, which Canik lists with a Trijicon RMR footprint. The other 31 RMR pages are open emitter, including every one of the 16 Holosun pages on the pattern.
So the decision reverses by requirement. If you want the widest possible choice, the RMR gives you 35 pages and 49 SKUs. If you want a sealed emitter and you are buying the plate anyway, the DeltaPoint Pro offers more of them, from four different brands, on the same gun.
Telling an RMR cut from a DeltaPoint Pro cut
Both patterns mount the same way. The export records both as screw-through with two screws, meaning the screws pass down through the optic body into the slide or plate rather than clamping the optic from the side. What separates them is underneath.
Count the sockets, not the screws. The RMR pocket has two recoil lug sockets, positioned forward of the screw holes, which the optic’s bosses drop into to take the recoil and index it square to the bore. The DeltaPoint Pro pocket has four, one at each corner, on a body closer to 46mm long. Flip the optic over and the difference is immediately visible: two pins or bosses in a line, or four in a rectangle.
But the socket count alone does not identify a DeltaPoint Pro, and this is where people go wrong. Three of the eleven footprints here publish the identical signature of two screws and four recoil sockets: RMSc, DeltaPoint Pro and Docter. The spread across that tie is most of the catalogue, from 135 reachable pistols on the RMSc down to 125 on the DeltaPoint Pro and 69 on Docter. So four sockets tells you the optic is one of three patterns and nothing more. The separator is body length: the DeltaPoint Pro is the long one at roughly 46mm, the RMSc the short one, and Docter shares both counts with the DeltaPoint Pro while staying its own pattern. If you have a measurement to make, make it lengthwise, not across the screws.
The RMR’s two-socket signature is cleaner but not unique either. It shares two screws and two recoil sockets with the Holosun K pattern. Those two are easy to keep apart in practice because the K is a micro pattern living on subcompact slides, so the size gap is obvious in the hand, but a two-socket pocket is still not automatically an RMR pocket.
On a plate gun, read the label and skip the measuring. Plate makers name their products by the footprint presented, which is the single most reliable tell available: Beretta’s kit is sold as the Leupold footprint plate, Springfield’s XD OSP plate set and Echelon pin sets are sorted by pattern, and C&H Precision’s compatibility pages list the plate per optic family. Glock’s own MOS plates are catalogued the same way: Glock’s MOS adapter plate page lists plate 02 for Trijicon and Holosun and plate 04 for Leupold and EOTech. Buying by part number is faster and safer than reverse-engineering a pocket.
What this dataset will not tell you. It records the screw count, the socket count and the mounting type for each footprint, and the pattern each optic sits on. It does not record screw thread size, screw spacing, torque specs or boss diameter for either pattern. Optic pages carry a window size on 22 of the 35 RMR pages and 1 of the 16 DeltaPoint Pro pages, a weight on 31 and 8, and a battery type on 32 and 13. For a cross-pattern mounting job with tight clearances, read the maker’s own spec sheet, not a footprint chart.
Which one to buy, by what you own
The answer depends on only one thing: whether your slide is milled or plated.
You own one of the 113 plate or dual-cut pistols that reach both. The pattern is a free choice, so choose by product, not by access. Want Trijicon, Holosun, Swampfox, Meprolight, Primary Arms, Riton or the Canik ONYX XL and PHANTOM: RMR plate. Want Leupold, EOTech, Vortex or SIG Sauer: DeltaPoint Pro plate. Want a sealed emitter: the DeltaPoint Pro’s 5 beat the RMR’s 4. Want the widest shortlist: the RMR’s 35 pages. A Glock 19 Gen5 MOS reaches 100 optic pages in total, and 51 of them, 51 percent, sit on these two patterns. The Walther PDP Standard Compact 5” reaches 101 and the same 51, the lowest share of any gun that reaches both at 50 percent, a share the P320 M17, M18 and X-Five Legion match, because their plate sets add more routes on top. A SIG P320 XCompact reaches 92, with the same 51, and on a P320 the DeltaPoint Pro side needs no plate at all, because SIG describes the PRO cut as a DeltaPoint Pro footprint.
Crucially, you are not locked in. On a plate gun that reaches both, changing your mind about the pattern means buying the other plate from the same plate maker, not a new slide and not a new gun. The cost of being wrong here is one plate.
You own one of the 6 RMR-milled slides or one of the 8 RMR-only plate guns. The Anderson Kiger-9C Pro, the two Lone Wolf models, the two Tisas PX9 Gen3 pistols and the Canik TP9SFx are cut for the RMR and nothing else, and the two Kimber 2K11 models, the two CZ Shadow 2 ORs, the three HK VP9A1s and the Canik TTI Combat have an RMR plate but no DeltaPoint Pro plate recorded from their plate makers. Your catalogue is the 35 RMR pages, and the DeltaPoint Pro is not recorded as available on any of the 14. There is no decision to make, only a shortlist to work through.
You own a slide milled for both: the Ruger RXM, the Shadow Systems MR920, the SIG P385 or a CZ DUTY. These five are the only pistols here milled for both patterns directly, with no plate in the stack. The MR920 and the P385 are the sharpest cases in the dataset: each reaches 51 optic pages in total, and all 51 are RMR or DeltaPoint Pro, the only two pistols on the site whose entire catalogue is both of these patterns and nothing else. Shadow Systems’ own mounting instructions treat the two as the choice to make, and SIG says the P385’s SIG LOC PRO system takes RMR and DPP footprint optics without an adapter plate (sigsauer.com). The RXM is cut for the RMSc as well, so it reaches 85 pages and the two patterns here cover 51 of them, per Ruger’s RXM spec sheet. The CZ DUTY 4.0 C and 4.0 F add the RMSc and the Holosun K on CZ’s pin set, 91 pages in all (czfirearms.com). For all five, mounting direct means no plate height and no plate screws, so the pattern choice is a one-time commitment rather than a swappable part.
You own the FN 309 MRD or a P320 no plate maker lists. The mirror image of the RMR-only slides: the FN 309 MRD is milled for the DeltaPoint Pro alone, and 11 of the 17 P320s, such as the XFull, the XTEN and the Spectre Comp, carry SIG’s DeltaPoint Pro cut with no C&H Precision or Outer Impact plate listed for the model. Your catalogue is the 16 DeltaPoint Pro pages and the RMR is not on the table in this data.
You own one of the 78 pistols that reach neither. Neither pattern is reachable. Most are milled micro slides; work from the RMSc hub instead.
One last framing. The RMR is the safer default on a plate gun because every plate gun here that takes a DeltaPoint Pro plate also takes an RMR plate, the catalogue is more than twice as deep, and the aftermarket holster and mount ecosystem is built around it. The DeltaPoint Pro is the better pick when a specific product is the reason for the purchase, and that happens more often than the raw page count suggests, because four brands live there and nowhere else, and because a third of the pattern is sealed.
How well sourced this comparison is
Worth stating plainly, because it bounds everything above. 112 of the 112 optic pages on this site carry a verification flag. Split by pattern, the DeltaPoint Pro has 16 of 16 verified, every page, and the RMR has 35 of 35, also every page; the last RMR page to clear the bar was the Holosun HE507OMP-GR, whose designation Holosun prints beside the RMR fitment on its own page. On source depth, 18 of the 35 RMR pages and 5 of the 16 DeltaPoint Pro pages rest on a single source URL, against 53 of 112 across the site.
The footprint records themselves are better sourced than the optic pages: the pattern definitions for both carry three independent source URLs each, and every one of the 45 plate paths behind the 116 and 107 figures carries its own source URL, which is what makes the 25-of-31 and 20-of-31 claims checkable rather than asserted. Where a fit is recorded here, the provenance chain names the plate and the page it came from. Where a page is unverified, treat the pattern as sound and the per-model detail as worth confirming on the maker’s own page before you spend money.
Sources
- RMR pattern definition, two screws and two front recoil lug sockets: opticsplanet.com guide to the most common red dot footprints, optics-trade.eu footprints on red dot sights
- DeltaPoint Pro pattern definition, two screws and four corner sockets at about 46mm: optics-trade.eu Leupold DeltaPoint Pro footprint
- Leupold DeltaPoint Pro: leupold.com DeltaPoint Pro
- Trijicon RMR Type 2: brownells.com RMR Type 2 RM01
- Trijicon RCR mounting, enclosed and on the RMR pattern: gatdaily.com Trijicon RCR mounting system
- Trijicon SRO footprint compatibility: military-spot.com Trijicon SRO footprint compatibility
- Holosun 507C-X2, RMR pattern: holosun.com HS507C-X2
- Meprolight MPO PRO-F, enclosed and on the RMR pattern: meprolight.com Mepro MPO PRO-F
- Primary Arms PLx HTX-1, enclosed and on the RMR pattern: primaryarms.com PLx HTX-1
- Riton 3 TACTIX PRD 3: ritonoptics.com 3 TACTIX PRD 3
- Swampfox Liberty and Justice: swampfoxoptics.com Liberty and Justice
- Bushnell RXM-300, the one Bushnell RMR page: bushnell.com RXM-300
- Bushnell RXS-10 and RXS-100, DeltaPoint Pro pattern: bushnell.com RXS-10, bushnell.com RXS-100
- Bushnell RXE-MR1, enclosed and on the DeltaPoint Pro pattern: bushnell.com RXE-MR1
- EOTech EFLX, DeltaPoint Pro footprint: riflesupply.com EOTech EFLX, DeltaPoint Pro footprint
- EOTech EFLX-CE, the brand’s first fully enclosed pistol optic: theloadoutblog.com EOTech EFLX-CE
- Vortex Venom Enclosed, DeltaPoint Pro footprint: dnwoutdoors.com Venom Enclosed with DeltaPoint Pro footprint
- Vortex Defender-ST Enclosed Solar: athlonoutdoors.com Defender Enclosed Solar micro red dot
- Vortex Defender-ST and Defender XL mounting: opticsforce.com Vortex Defender-ST mounting guide
- SIG Romeo-X Pro and ROMEO3MAX PRO: gritroutdoors.com SIG Romeo-X Pro SORX1000, sigsauer.com ROMEO3MAX PRO, PRO (DeltaPoint Pro) footprint
- SIG Romeo-X Enclosed Pro: grayguns.com SIG Romeo-X Enclosed Pro
- Beretta 90-Series plate kits, named by presented footprint: beretta.com Leupold footprint kit EUS03051, beretta.com Trijicon footprint kit EUS03052
- Glock MOS adapter plates 01 to 08: eu.glock.com MOS adapter plates
- C&H Precision plate compatibility, both patterns per system: S&W M&P CORE, FN 509, CZ P-10 C, HK VP9
- Springfield plate and pin systems: springfield-armory.com Adaptive Optics System, Echelon complete pin set, XD OSP optic mounting plate
- Taurus TORO plate and screw kit: shoptaurus.com G3c and G3 TORO optic mounting plates
- Walther PDP plate versions: optics-spot.com Walther PDP optics-ready plates explained
- Outer Impact modular adapters: SIG P320 M17, SIG P320 X5, Canik METE, Ruger
- Shadow Systems MR920 optic mounting, cut for both patterns: shadowsystemscorp.com MR920 how to mount your optic
- Ruger RXM spec sheet: ruger.com RXM spec sheet
- FN 309 MRD, DeltaPoint Pro cut: fnamerica.com FN 309 MRD
- SIG P320 PRO cut, a ROMEO1PRO and Delta Point Pro footprint: sigsauer.com P320 PRO-CUT slide announcement
- Staccato HD HOST kit, RMR and DeltaPoint Pro plates: staccato2011.com HD HOST mounting kit
- Kimber 2K11 RMR plate: kimberamerica.com 2K11 Target OR
- C&H Precision P320 R1P/DPP-cut plates and the models they list: chpws.com SIG P320 Legion, X-Five, M17, M18
- Canik TP9SFx, optic footprint updated to RMR: canik.com TP9SFx
- The five RMR-milled aftermarket slides: shootingillustrated.com Anderson Kiger-9C Pro, recoilweb.com Lone Wolf Dusk 19, americanrifleman.org Lone Wolf LTD19 V1, shootingillustrated.com Tisas PX-9 Gen3 Duty, shootingillustrated.com Tisas PX9 Gen3 O-R Carry
Further reading on this site: the RMR footprint guide, the DeltaPoint Pro footprint guide, RMR against RMSc, Docter against RMR and do you need an adapter plate.
Frequently asked
What is the difference between the RMR and DeltaPoint Pro footprints?
Underneath, the socket layout. Both patterns use two screws passing down through the optic body, but the RMR pocket has two recoil lug sockets sitting forward of the screw holes and the DeltaPoint Pro pocket has four, one at each corner, on a longer body of roughly 46mm. They are not interchangeable and no plate in this dataset presents both from one face. On the catalogue side the gap is large: 35 optic pages across 49 SKUs from 8 brands on the RMR, 16 pages across 17 SKUs from 5 brands on the DeltaPoint Pro, with no single model on both.
Which footprint fits more pistols, the RMR or the DeltaPoint Pro?
The RMR, by 8 pistols net. The RMR reaches 133 of the 223 pistols here and the DeltaPoint Pro reaches 125, with 113 in common. Through plates the DeltaPoint Pro's 107 are a strict subset of the RMR's 116: the RMR is presented by 25 of the 31 plate systems in this dataset and the DeltaPoint Pro by 20. The RMR adds 20 pistols the DeltaPoint Pro cannot reach, among them the RMR-milled Anderson Kiger-9C Pro, Lone Wolf, Tisas and Canik TP9SFx slides and plate guns such as the CZ Shadow 2 OR and the Kimber 2K11. The DeltaPoint Pro adds 12 the RMR cannot reach: the FN 309 MRD and the 11 SIG P320s whose models no plate maker in this dataset names. SIG describes the P320 PRO cut as a DeltaPoint Pro footprint, so all 17 P320s take a DeltaPoint Pro optic directly, but only the 6 that C&H Precision or Outer Impact list for their plates add the RMR.
Can I put a DeltaPoint Pro on a Glock MOS?
Yes, on Glock's MOS plate 04, which Glock lists for Leupold, and an RMR optic goes on the same gun through plate 02. Every Glock MOS pistol in this dataset reaches exactly 35 RMR optic pages and exactly 16 DeltaPoint Pro pages, so the slide never decides between them. A Glock 19 Gen5 MOS reaches 100 optic pages in total, and 51 of those 100, or 51 percent, sit on these two patterns.
Does the RMR or the DeltaPoint Pro have more enclosed emitter optics?
The DeltaPoint Pro, and by both measures. It carries 5 enclosed emitter pages of its 16, which is 31 percent, against 4 of 35 on the RMR, which is 11 percent. So the smaller catalogue has more sealed options in absolute terms as well as in share. The DeltaPoint Pro five are the Bushnell RXE-MR1, the EOTech EFLX-CE, the SIG Romeo-X Enclosed Pro, the Vortex Defender-ST Enclosed Solar and the Vortex Venom Enclosed. The RMR four are the Trijicon RCR, the Meprolight MPO PRO-F, the Primary Arms PLx HTX-1 and the Canik PHANTOM.
Is the DeltaPoint Pro footprint the same as the Shield RMSc or the Docter pattern?
No, and this is the trap in identifying it. Three of the eleven footprints here publish the same signature of two screws and four recoil sockets: RMSc, DeltaPoint Pro and Docter. Counting sockets tells you the optic is in that group of three and nothing more, and the group spans most of the catalogue, from 135 reachable pistols on the RMSc down to 69 on Docter. Body length is the separator, with the DeltaPoint Pro the long one at about 46mm.