SIG P320 Outer Impact optic footprint and plates

The SIG P320 Outer Impact is a plate system, not an optic footprint. 5 pistols use it, and its plates present the C-More STS, DPP, Docter, RMR and RMSc footprints.

Outer Impact's M.R.A. adapter plates for the SIG P320 PRO cut. Outer Impact lists its M17 plate for the civilian P320 M17 and M18, the X-5 Legion, the X-Compact and the X-Carry with a loaded chamber indicator, and its X5 plate for the P320-X5 and an X-Carry without one. Both present the RMR, Docter, DeltaPoint Pro, C-More and Shield RMS patterns.

Plate system

SIG P320 Outer Impact

Family:
SIG P320 Outer Impact plate system
Screw count:
not recorded
Mounting:
proprietary_plate
Optics:
0
Pistols:
5

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

What the SIG P320 Outer Impact plate system is

The SIG P320 Outer Impact is a plate system, not a footprint. It is one aftermarket part, Outer Impact’s Modular Red Dot Adapter (M.R.A.), which bolts into the optic cut of a P320 slide and lets “a variety of red dot sights” sit on top “with one adapter” (outerimpact.com). The pattern your optic uses decides which screws you take from the pack; the slide never changes.

That is the first thing to know about this page. The plate table further down lists 5 plate paths, one per pattern, because this site records a fit as “plate presents pattern”. Physically they are the same plate. You buy one M.R.A., in the version made for your model, not 5 separate plates.

The underlying cut is SIG’s own. SIG describes the P320 PRO cut as “an optic ready slide with a SIG SAUER Electro-Optics ROMEO1PRO and Delta Point Pro footprint” (sigsauer.com), so a DeltaPoint Pro pattern optic mounts on every P320 here with no plate at all. The M.R.A. is for everything else.

This site records the 5 P320 models Outer Impact itself names:

How to tell which M.R.A. your P320 takes

Outer Impact sells two versions and the difference is the slide, not the optic.

  1. Civilian or military. The M17 version’s page says “Not compatible with the Military M17/M18 versions” (outerimpact.com). If your M17 or M18 is a commercial model sold as a P320 M17 or P320 M18, read on.
  2. Which model family. The M17 version (SKU OTL-RDM-SIG03a) lists the civilian P320-M17, M18, X-5 Legion and X-Compact. The X5 version (SKU OTL-RDM-SIG04a) lists the P320-X5 (outerimpact.com).
  3. The X-Carry check. An X-Carry can take either version, and Outer Impact splits it on one feature: with a loaded chamber indicator it takes the M17 version, without one it takes the X5 version. Look at the slide before you order.
  4. The two exclusions. The X5 page says it “DOES NOT WORK WITH X-VTAC, or X5 LEGION”. An X-Five Legion takes the M17 version, not the one with X5 in its name.

Once the plate is in your hand, the top face tells you which patterns it was cut for. The RMR pattern shows 2 screw holes with 2 recoil bosses forward of them, the C-More STS pattern shows 2 screw holes and no bosses, and the RMSc, DeltaPoint Pro and Docter patterns all show 2 screws and 4 corner bosses (opticsplanet.com). This site publishes no measurement that separates those last three, so match your optic by the pattern its own maker names, never by counting holes.

Dimensions and screw pattern

What Outer Impact publishes for the P320 M.R.A., and what nobody publishes:

PropertyValueSource
KindPlate system, not a footprintthis site
PlateOne modular adapter, two versions (M17 and X5)outerimpact.com
Material and finishBillet 7075-T6 aluminum, black anodizeouterimpact.com
Plate size2.02 in long, 1.06 in wide, 0.13 in highouterimpact.com
Weight1 ozouterimpact.com
Alignment2 steel sight alignment pinsouterimpact.com
Screw pack2 x 4-48 SHCS; 2 each M3 x 8, x 9 and x 6 mm flat head; 2 x M3 x 6 mm SHCS; 2 x 6-40 flat head (RMR); 2 x M4 x 10 mm rounded headouterimpact.com
ToolsT-10 Torx driver (not included), torque driver, extended shank 3/32 Allen bitouterimpact.com
Which screw holds the plate to the slideNot publishednone
Torque valuesNot publishednone
Slide pocket dimensionsNot published as text (the maker points to a gallery image)none
Screw count on the system recordNot recordedthis site

Outer Impact’s page carries a design patent number, US D851,196S, and says the plate uses “weaver T-10 Torx screws and steel alignment pins to keep everything aligned”. It does not say which pair of screws in the pack is the plate-to-slide pair, so this page does not guess. Follow the installation instructions that ship with the plate, and the optic maker’s own torque for the optic screws.

Common confusions

Outer Impact against C&H Precision. Two different makers sell plates for the same P320 PRO cut, and this site keeps them on separate pages. The C&H set is the SIG P320 C&H plate system, which presents RMR, ACRO and Holosun 509T (chpws.com). The two makers name 4 of the same models, and they reach different optics. Outer Impact adds 41 optic pages C&H does not, all on the RMSc, Docter and C-More STS patterns; C&H adds 9 that Outer Impact does not, the ACRO and 509T clamp optics. Neither replaces the other.

The DeltaPoint Pro path that adds nothing. Outer Impact lists the Leupold Delta Point Pro among its compatible sights, so the table below shows a DeltaPoint Pro path. On a P320 that path duplicates a fit the slide already has: the PRO cut takes the 16 DeltaPoint Pro pattern optics directly, and the plate reaches no DeltaPoint Pro page the bare slide does not. Fit a DeltaPoint Pro pattern optic straight to the slide.

Shield RMS, RMSc and Holosun K. Outer Impact names the “Shield RMS”, with screws bought separately, and this site files that path under the RMSc pattern, which shares the RMS screw and boss layout (the RMSc hub sets out the body-size difference). The Holosun K pattern is a different matter: Outer Impact says the 507K and 407K “require the Micro adapter” and that micro adapters “are not available for all firearms”, so no Holosun K path is recorded for this system.

The same five patterns on another gun. Outer Impact sells an M.R.A. for the Canik METE that presents the same RMR, RMSc, DeltaPoint Pro, Docter and C-More STS patterns (outerimpact.com). It is machined for a Canik pocket and does not fit a P320. What carries over between the two is the optic, never the plate.

Not a footprint, and not every P320. There is no “Outer Impact footprint” for an optic maker to cut to. The plate presents existing patterns. And a P320 that Outer Impact does not name is not on this page: 11 of the 17 P320 models in this dataset are named by neither plate maker and are recorded with the direct DeltaPoint Pro fit only. One edge case sits on the maker’s own page: its product attributes list an X-Full under the M17 version while its compatible-guns list does not, so this site leaves the P320 XFull off the system until Outer Impact’s own list names it.

The plate paths, in words

The M.R.A. presents 5 patterns, and each one links to the hub that owns its optic list:

Add them up for each model. A P320 XCompact, on the Outer Impact plate only, reaches 92 optic pages from 17 brands, 19 of them enclosed emitters; only 37 of the 223 pistols in the dataset reach more. The 4 models both makers name add the C&H clamp optics on top and reach 101, the highest reach of any pistol here, shared by 11 pistols. A P320 named by neither maker, such as the P320 Full Size, stays at 16.

Buying guidance

Where to go next

Pistols with the SIG P320 Outer Impact system · 5

Plates available

Presents Plate Sources Optics that fit
C-More STS Outer Impact P320 M.R.A. (C-More STS) outerimpact.comouterimpact.com 1 optic
DPP Outer Impact P320 M.R.A. (DPP) outerimpact.comouterimpact.com 16 optics
Docter Outer Impact P320 M.R.A. (Docter) outerimpact.comouterimpact.com 6 optics
RMR Outer Impact P320 M.R.A. (RMR) outerimpact.comouterimpact.com 35 optics
RMSc Outer Impact P320 M.R.A. (RMSc) outerimpact.comouterimpact.com 34 optics

Frequently asked

Which pistols use the SIG P320 Outer Impact system?

5 pistols use the SIG P320 Outer Impact plate system, including the Sig Sauer P320 M17, Sig Sauer P320 M18, Sig Sauer P320 X-Five Legion and Sig Sauer P320 XCarry Legion.

Which optics fit the SIG P320 Outer Impact?

Its plates present the C-More STS footprint (1 optic), DPP footprint (16 optics), Docter footprint (6 optics), RMR footprint (35 optics) and RMSc footprint (34 optics). Pick the plate for the footprint your optic uses.

Do I need a plate?

Yes. The SIG P320 Outer Impact does not take an optic directly. Fit one of its plates: Outer Impact P320 M.R.A. (C-More STS), Outer Impact P320 M.R.A. (DPP), Outer Impact P320 M.R.A. (Docter), Outer Impact P320 M.R.A. (RMR) and 1 more.

Which Outer Impact plate fits my SIG P320?

Outer Impact sells its P320 M.R.A. in two versions. The M17 version (SKU OTL-RDM-SIG03a) is listed for the civilian P320-M17 and M18, the X-5 Legion, the X-Compact, and an X-Carry that has a loaded chamber indicator. The X5 version (SKU OTL-RDM-SIG04a) is listed for the P320-X5 and an X-Carry without a loaded chamber indicator (outerimpact.com). This site records 5 P320 models on the system.

Does the Outer Impact X5 plate fit a P320 X-Five Legion?

No. Outer Impact's X5 adapter page says it "DOES NOT WORK WITH X-VTAC, or X5 LEGION", and its M17 adapter page names the X-5 Legion instead (outerimpact.com). On an X-Five Legion, order the M17 version.

Does the Outer Impact P320 plate fit a military M17 or M18?

No. Outer Impact's M17 adapter page says "Not compatible with the Military M17/M18 versions" (outerimpact.com). The P320 M17 and M18 recorded on this page are the civilian models.

Can I put a Holosun 507K or a Shield RMSc on the Outer Impact P320 plate?

A Shield-pattern optic, yes: Outer Impact lists the Shield RMS, with screws bought separately, and this site files that path under the RMSc pattern, 34 optic pages. A Holosun 507K or 407K, not on this plate: Outer Impact says those models "require the Micro adapter" and that micro adapters are not available for all firearms, so no Holosun K path is recorded for the P320 here (outerimpact.com).

What comes in the box with the Outer Impact P320 plate?

Outer Impact lists the plate, two sight alignment pins and a screw pack: two 4-48 socket head cap screws, three pairs of M3 flat head screws (8, 9 and 6 mm), two M3 x 6 mm socket head cap screws, two 6-40 flat head screws marked for the RMR, and two M4 x 10 mm rounded head screws. A T-10 Torx driver is not included, and the page asks for a torque driver but publishes no torque value (outerimpact.com).

Outer Impact or C&H Precision plates for a P320?

It depends on the model and the optic. On a P320 XCompact only Outer Impact is recorded, for 92 optic pages. On an X-Five SXG only C&H is recorded, for 60. Where both makers name the model, Outer Impact adds 41 pages C&H does not reach (the RMSc, Docter and C-More STS patterns) and C&H adds 9 Outer Impact does not (ACRO and Holosun 509T).