The Docter footprint

The Docter is a pistol optic footprint that mounts with 2 screws (screw_through). 6 red dot optics use the Docter footprint, including the Burris FastFire 3, Burris FastFire 4 and Crimson Trace CTS-1250 Compact Open Reflex Sight. It also mounts on 69 more pistols through an adapter plate.

Docter / Noblex pattern (historically Doctersight). Two screws and four corner sockets to accept recoil pins. Older European standard, predates RMR's industry dominance. Used by Burris FastFire 2/3/4, Vortex Viper, Vortex Venom, Hex Dragonfly, Primary Arms SLx RS-10, Sig Sauer Romeo1 (original), Meopta Meosight, Viridian RFX25, and several other mid-2010s reflex sights.

Footprint

Docter

Family:
Docter / Noblex
Screw count:
2
Mounting:
screw_through
Optics:
6
Pistols:
0 direct · 69 via plate

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

The tables on this page own the full Docter optic list and the plate systems that present it. The sections below carry what a table cannot: how to identify the pocket when the usual screw count test fails, exactly what geometry this dataset does and does not publish, the several names the pattern is sold under, and where Docter sits relative to the patterns it competes with on the same slide. The side by side argument against the RMR lives in Docter footprint vs RMR, which this page links rather than repeats.

How to identify a Docter pocket when the socket count ties

Most footprint guides tell you to turn the optic over and count the screw holes and the recoil sockets. On this pattern that advice runs out, and it is worth knowing exactly where it runs out before you buy a plate.

Three of the eleven footprints on this site publish the identical signature. Docter records a screw through mounting style, 2 screws and 4 recoil sockets. So do RMSc and DeltaPoint Pro. Counting gets you to a three way tie, and the three are not interchangeable with one another in either direction. The cost of guessing wrong is the whole spread of the catalogue:

The full size Holosun EPS used to sit in this tie as a fourth pattern. Holosun lists it as a K footprint optic, so it is filed under Holosun K now and is out of the comparison.

What the socket count does settle is the comparison people actually make, which is against the RMR: RMR records 2 recoil lugs where this pattern records 4, and two is not four. That single test separates Docter from the 35 optic pattern next to it and from Holosun K, which also records 2. It separates it from nothing else.

So identify by label and by model, in that order. Three checks that do work:

  1. Read the plate listing, not the kit box. Because no slide here is milled for this pattern, your pistol never tells you whether Docter is available. The plate does, and plates arrive marked. Glock’s own MOS plate chart lists plate 01 for “Docter, Meopta, Insight, Vortex, Burris” (glock.com), and OuterImpact’s modular adapter listings name the pattern directly (outerimpact.com).
  2. Match a part number, where one exists. Four of the 6 optic pages here carry a real manufacturer part number: the Burris FastFire 3 at 300234, the FastFire 4 at 300259, the Primary Arms SLx RS-10 at 810024 and the Crimson Trace CTS-1250 at 01-00560. The two Vortex rows carry only the model name, so there is no number to match for a Venom or a Viper.
  3. Use the optic to identify the pocket, not the pocket to identify the optic. The pattern has six members and they are all named on their own product pages. Working backwards from a known optic is reliable in a way that measuring a pocket with a ruler is not.

Pattern and dimensions, and the numbers this page does not publish

Here is the complete set of geometry this dataset holds for the pattern, and the source for it. Docter mounts screw through, with 2 screws passing down through the optic body, and 4 recoil sockets in the underside of that body which drop onto pins standing up from the plate. OpticsPlanet’s footprint guide is the source recorded for the socket arrangement, describing a pattern that utilizes 2 screw holes and 4 sockets to accept recoil pins (opticsplanet.com), and Optics Trade’s survey covers the same family under both the Docter and Noblex names (optics-trade.eu).

Everything else is not published here, and the gap is deliberate rather than an oversight. No screw spacing, no socket diameter, no thread pitch and no body length appears on this page, because neither recorded source carries a drawing and no first party Docter or Noblex document is recorded against the pattern. The same shortfall runs through the optic rows: of the 112 optic pages on this site, 51 publish a window width or height, 83 a weight and 99 a battery type, and the Docter pages are thinner than that: 1 of the 6 publishes a window size, 4 a weight and 5 a battery type. What the Docter rows do carry is 4 reticle specifications and 2 UPCs out of 6.

Stating a screw spacing we cannot cite would make this page more useful looking and less true, so the dimension that would settle a borderline case is the one dimension nobody here can give you. Until a manufacturer drawing is recorded, the part number is the measurement.

The names this pattern is sold under

This is the pattern’s real difficulty, and it is a labelling problem rather than an engineering one. The interface is sold under at least three of its own names and several borrowed ones, and the plate you need may carry any of them.

Its own names. Docter is the name this site uses. Noblex is the same pattern under its other current name, which is why this dataset records the family as Docter / Noblex. Doctersight is the historical name, recorded in this pattern’s own description.

Borrowed names, which is where the money gets lost. Plate makers routinely label the pocket with the name of an optic that fits it. Taurus’s own TORO plate kit page sells one plate as fitting “Vortex Venom/ Doctor Noblex / Burris Fast Fire/ Sightmark Mini” (shoptaurus.com), four labels for one interface, with the pattern’s name misspelled in the middle of them. EGW sells its mount as fitting “Burris FastFire and Docter” (egwguns.com). Shadow Systems’ own mounting instructions for the MR920 go further and drop the pattern name entirely, listing the Vortex Viper as a standard of its own beside the Trijicon RMR and the Leupold DeltaPoint Pro (shadowsystemscorp.com).

The practical rule: treat any of Docter, Noblex, Doctersight, Vortex Venom, Vortex Viper or Burris FastFire on a plate listing as naming this pattern, and confirm against the specific optic you own. One caution on that list. The Vortex Venom name is ambiguous by itself, because the enclosed Venom is a different pattern, and the Sightmark Mini named on the Taurus listing has no page in this dataset at all, so it is a label we can report but not corroborate.

Look-alikes that will not interchange

Beyond the three way signature tie above, three more comparisons come up often enough to be worth settling.

Nothing on this list is a plate system. Glock MOS, SIG P320 C&H and the rest are factory plate systems, not footprints: they present a footprint through a plate, and the plate you fit decides which optics mount.

Where Docter sits in the mounting ladder

The plate table on this page lists the 18 systems that present the pattern. What the table cannot show is how those paths relate to the other patterns on the same slides. Computed across all 223 pistols, the reachable sets mostly nest:

C-More STS, 41 pistols, sits almost entirely inside Docter, 69. 38 of the 41 pistols that reach C-More here reach Docter too; the three that do not are the Glock 19 Gen6 and its G17 and G45 siblings, whose Glock OR kit carries a C-More plate and no Docter plate. Docter in turn sits inside DeltaPoint Pro, 125, and RMR, 133, with a handful of exceptions that are each one maker’s plate list: the Beretta 80X Cheetah and APX A1 Carry, whose Beretta kits stop at Docter, Holosun K, RMSc and C-More, the Canik TP9 Elite Combat, whose one recorded plate is Docter, and the three HK VP9A1 models, whose HK plates include RMR but not, on any page read here, the DeltaPoint Pro. DeltaPoint Pro and RMR do not nest either: eleven SIG P320s and the FN 309 MRD are cut for DeltaPoint Pro directly and record no RMR path.

Three consequences follow, and they are the whole decision.

Docter is almost never the only way to get a dot on a gun. On 66 of the 69 slides that take a Docter plate, an RMR plate exists too, with 35 optic pages behind it against this pattern’s 6. The three where it does not are the 80X, the APX A1 Carry and the TP9 Elite Combat named above.

No optic brand is locked behind this pattern. Four of the eleven footprints here do lock one: Trijicon sells only on RMR, Shield Sights and ZeroTech only on RMSc, EOTech and Leupold only on DeltaPoint Pro, and Colt Optics only on ACRO. Aimpoint is not locked to ACRO, since its COA sits on A-CUT. Docter locks none. All four of its brands, Burris, Vortex, Primary Arms and Crimson Trace, sell on at least one other pattern as well, so a Docter plate buys you six specific models and never a brand you could not otherwise reach.

The arithmetic shifts on the kits with no RMSc plate. Six of the 18 Docter-carrying systems record no RMSc plate: the Taurus TORO, three Beretta families, the Springfield XD Mod.4 OSP and the Canik TP9 Elite Combat. That is why a TORO pistol reaches 58 optics and a Beretta 92XI 65, where a Walther PDP Standard Compact 5” reaches 101. On a list that short, six optics is a real branch rather than a rounding error. The linked article works that case through in detail.

What a Docter plate is actually worth

Because the optic lists of the patterns in a plate kit do not overlap, the value of adding this plate is exactly countable: 6 optic pages, no more and no less. There is no hidden overlap to discover and no second pattern that comes along with it.

That makes the buying rule short. Buy the plate when the optic came first: you own a FastFire 3, an older open emitter Venom or a Viper, the sight is a real object in a drawer, and one plate puts it on the gun. Check that your pistol is one of the 69 and that its kit sells this plate separately, and you are done.

Do not buy the pattern in the abstract. If you are choosing glass with the pistol already decided, the same slide almost always reaches 35 RMR pages and 16 DeltaPoint Pro pages as well, so choosing Docter costs you options and buys you nothing structural. No price guidance appears on this page: offers shown next to the optic rows come from retailer feeds and move without notice, and a street price quoted in editorial copy would be wrong within the month.

The enclosed emitter rule

One property of this pattern decides a whole category of purchase, and it is absolute in this dataset. All 6 Docter optic pages are open emitter sights. Zero are enclosed. Docter is the only footprint here with more than one optic page and no enclosed member, against 34 enclosed pages across the 112.

The patterns at the other extreme are worth naming, because they are what people move to: ACRO is 7 of 7 enclosed and the Holosun 509T 2 of 2. The mixed patterns carry the volume, with RMSc at 10 enclosed of 34 pages, DeltaPoint Pro at 5 of 16 and Holosun K at 4 of 6.

The useful part is that this is a plate decision rather than a pistol decision on almost every slide. 68 of the 69 Docter capable pistols reach enclosed options through a different plate in the same kit. The leanest kits are the Beretta 80X at 4 enclosed pages and the TORO and the Beretta 90-Series at 9; a Glock MOS, a Gen 1 Walther PDP or a Springfield Echelon reaches 26, and a Gen 2 Walther PDP, which adds a Holosun 509T plate, reaches 28. The one exception is the Canik TP9 Elite Combat, whose single recorded plate is Docter. If sealing the emitter against lint and rain is the requirement, nothing on this page will do it, and on every other Docter capable slide the fix is one plate away.

How well sourced this pattern is

Worth stating plainly, because it runs against what a six optic list looks like from the outside. Every one of its 6 optic pages carries the verified flag, as does every one of the 112 optic pages site wide, so a short list here is not a thinly sourced one. A verified row means a manufacturer page naming the pattern for that exact model, or two independent sources doing so, recorded against the row.

Two caveats, both on the page because they bear on what you can trust here.

The one row not verified on its maker’s page is the Burris FastFire 3: its sibling the FastFire 4 states the pattern on Burris’s own page (burrisoptics.com), while the FastFire 3 page does not name it the same way (burrisoptics.com). Its flag rests on two independent retailer pages instead, Optics Trade and Mounts Plus.

The pattern record itself is the weaker half. It rests on two third party footprint round ups and nothing from Docter or Noblex, which is why the dimensions section above has so little in it, and the two Walther plate paths rest on a single third party plate guide. The plate side is stronger than it was: Glock’s own MOS chart now carries the 15 MOS Glocks onto this pattern, which also settles what the Primary Arms SLx RS-10 page meant when it said a Glock MOS adapter plate ships in the box. This site will not claim a fit nobody published.

Where to go next

The full footprint index lists all 42 interfaces, 11 patterns and 31 plate systems, with their optic and pistol counts side by side. Docter footprint vs RMR argues the subset relationship in detail and works through every plate system’s share. If you have landed here holding an optic rather than a pistol, the Vortex Venom page lists all 69 pistols that one sight fits. If you are not yet sure your pistol needs a plate at all, do you need an adapter plate answers that first.

Optics with the Docter footprint · 6

Mount it with a plate

Beretta 80X · 1 pistol

Via the Beretta 80X plate kit (Docter). beretta.com

Show the 1 pistol
All 1 pistol with the Beretta 80X plate system

Beretta APX A1 · 2 pistols

Via the Beretta APX A1 plate kit (Docter). beretta.com

Show the 2 pistols
All 2 pistols with the Beretta APX A1 plate system

Beretta APX A1 Carry · 1 pistol

Via the Beretta APX A1 Carry plate kit (Docter). beretta.com

Show the 1 pistol
All 1 pistol with the Beretta APX A1 Carry plate system

Canik METE · 1 pistol

Via the Outer Impact Canik METE M.R.A. (Docter) plate. outerimpact.com

Show the 1 pistol
All 1 pistol with the Canik METE plate system

Canik SFx Rival · 2 pistols

Via the Canik SFx Rival optic plate (Docter). canik.comcanik.com

Show the 2 pistols
All 2 pistols with the Canik SFx Rival plate system

Canik TP9 Elite Combat · 1 pistol

Via the Canik TP9 Elite Combat optic plate (Docter). midwestgunworks.com

Show the 1 pistol
All 1 pistol with the Canik TP9 Elite Combat plate system

Ruger factory plate · 1 pistol

Via the OEM/Aftermarket Ruger factory optic adapter plate system optic plate (Docter). outerimpact.comshopruger.comshopruger.com

Show the 1 pistol
All 1 pistol with the Ruger factory plate

Springfield XD Mod.4 OSP · 1 pistol

Via the Springfield Armory XD Mod.4 OSP plate (Docter). springfield-armory.comstore.springfield-armory.com

Show the 1 pistol
All 1 pistol with the Springfield XD Mod.4 OSP plate system

Springfield XD OSP · 3 pistols

Via the OEM/Aftermarket Springfield XD OSP optic plate (Docter). store.springfield-armory.com

Show the 3 pistols
All 3 pistols with the Springfield XD OSP plate system

Walther PDP 1.0 · 1 pistol

Via the Walther PDP Gen 1 Optic Plate (Docter). waltherarms.comwaltherarms.comoptics-spot.com

Show the 1 pistol
All 1 pistol with the Walther PDP 1.0 plate system

Frequently asked

What optics use the Docter footprint?

6 optics use the Docter footprint, including the Burris FastFire 3, Burris FastFire 4, Crimson Trace CTS-1250 Compact Open Reflex Sight and Primary Arms SLx RS-10.

How is the Docter footprint mounted?

The Docter footprint uses 2 screws and a screw through mounting style. It also incorporates 4 recoil lugs to resist rearward movement under firing.

Is the Docter footprint part of a larger family?

The Docter footprint is part of the Docter / Noblex family. Optics and adapter plates within the same family often share compatible mounting dimensions, which can expand which pistols and adapter solutions are available.

Which pistols take the Docter with a plate?

69 pistols reach the Docter through an adapter plate, using the Beretta 80X, Beretta 90-Series, Beretta APX A1, Beretta APX A1 Carry and 14 more plate systems.

Is the Docter footprint the same as the Noblex footprint?

Yes. Docter, Noblex and the older Doctersight name all describe the same mounting pattern, and this dataset records them as one footprint family. The practical problem is that a plate you need may be labelled with any of those three names, or with the name of an optic that uses the pattern instead. Taurus sells the plate for its TORO kit grouped as Vortex Venom, Doctor Noblex, Burris Fast Fire and Sightmark Mini on one line, which is four names for one interface and one of them misspelled. Read the label as a list of compatible optics, not as a brand.

What is the difference between the Docter and DeltaPoint Pro footprints?

Size, not layout. Both record two screws and four recoil sockets in this dataset, so counting fasteners cannot separate them, and a DeltaPoint Pro optic will not seat in a Docter pocket. What separates them here is reach: 6 optic pages sit on Docter and 16 on DeltaPoint Pro, and 69 of the 223 pistols reach Docter against 125 for DeltaPoint Pro. 63 of the 69 Docter capable pistols can also take a DeltaPoint Pro optic, so when the label is ambiguous the DeltaPoint Pro plate is usually the safer thing to order on the same slide, but check the kit: the Beretta 80X and APX A1 Carry, the HK VP9A1 models and the Canik TP9 Elite Combat record a Docter plate and no DeltaPoint Pro one.

How do I tell a Docter plate from an RMSc plate?

Not by the screws or the sockets, because both patterns record two screws and four sockets here. Three of the eleven footprints on this site publish that same signature: RMSc, DeltaPoint Pro and Docter. The reliable readings are the part number on the plate listing and the optic the listing names. If the listing names a Shield Sights RMSc, a SIG RomeoZero, a Vortex Defender-CCW or a Springfield Hellcat, it is RMSc. If it names a Vortex Venom, a Vortex Viper or a Burris FastFire 3, it is this pattern.

Is there an enclosed emitter optic with a Docter footprint?

Not in this dataset. All 6 Docter optic pages are open emitter sights, and Docter is the only pattern here with more than one optic page and no enclosed member at all, against 34 enclosed pages site wide. On almost every pistol this is a solved problem rather than a dead end: 68 of the 69 Docter capable pistols reach enclosed optics through another plate in the same kit. The exception is the Canik TP9 Elite Combat, whose one recorded plate is Docter. If you want a sealed emitter, change the plate, not the pistol.

What plate do I need to mount a Vortex Venom?

The Docter or Noblex plate from your pistol's own plate kit, and only if your pistol is one of the 69 the pattern reaches. Two cautions. The open emitter Venom is this pattern, while the newer Venom Enclosed is a DeltaPoint Pro optic reaching 125 pistols, so the model name alone does not settle which plate you need. And this dataset holds no manufacturer part number for the Venom or the Viper, only the model name, so there is no Vortex number here to match against a plate listing.

Does any pistol come cut for the Docter footprint from the factory?

None of the 223 pistols in this dataset. Docter records 0 direct fit pistols and reaches all 69 of its pistols through an adapter plate, across 18 of the 31 plate systems here. That makes the plate, not the slide, the thing that decides whether the pattern is available to you, and it means a pistol advertised as optic ready tells you nothing about Docter until you read what its plate kit contains.