The Holosun K footprint

The Holosun K is a pistol optic footprint that mounts with 2 screws (screw_through). 6 red dot optics use the Holosun K footprint, including the Holosun EPS-CARRY, Holosun EPS and Holosun 407K-X2. It also mounts on 46 more pistols through an adapter plate.

Modified RMSc pattern. Identical screw spacing and front lug positions to RMSc, but the rear recoil lugs are removed: only two front lugs with shallower recesses. The modification enables the waterproof rating on K-series optics. Holosun files the 407K, 507K, EPS Carry, SCS Carry and the full-size EPS under this footprint, and the full-size EPS ships with an RMR to K adapter plate. The EPS Core is RMSc. RMSc-cut slides need an adapter (Holosun sells an RMSc to K plate) or modification to take K-series optics.

Footprint

Holosun K

Family:
Holosun K
Screw count:
2
Mounting:
screw_through
Optics:
6
Pistols:
21 direct · 46 via plate

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

The Holosun K footprint is the mount on Holosun’s 407K, 507K and EPS Carry lines: two screws, two front recoil lugs and a flat rear underside, sized for micro carry slides. Holosun’s own 507K-X2 page states “Fitment Direct Mount K Footprint” and lists a 0.58 by 0.77 inch window on a 1.6 by .98 by .95 inch body (holosun.com), which is the size class to expect from any K optic. Holosun K compatibility in this dataset: 6 optic pages, 21 pistols cut for the pattern directly and 46 more that reach it through a plate. It is not RMSc, even though the screw spacing and front lugs match; the rear of the cut is where the two part ways, as the sections below show. Even one slide maker can run both families: the Shadow Systems CR920 Combat and Elite and the Shadow Systems CR920P are recorded for Holosun K and RMSc, while the Shadow Systems MR920 optic cut is recorded for RMR and DeltaPoint Pro instead (shadowsystemscorp.com), so a Shadow Systems red dot footprint question has two different answers depending on the model.

How to identify a Holosun K cut without a caliper

Three checks, cheapest first. Two of them are decisive and the one most people reach for is not.

  1. Read the optic’s model name. Holosun is consistent enough that this settles most cases before you touch the gun. A K in the model number is the K pattern: the 407K-X2 and the 507K-X2. The word Carry in an enclosed model name means the same pattern: the EPS Carry, the Ronin EPS Carry and the SCS Carry. The full size EPS is a K optic too, by Holosun’s own fitment line. A C in the model number is the full size Trijicon pattern instead, as on the 507C-X2, which is why that one appears on the RMR hub and not here.
  2. Turn the optic over and look at the rear of its underside. A K optic has two lug recesses toward the front and a flat rear face. An RMSc optic has four recesses, one near each corner. This is the check that cannot be faked by a box or a listing, and it is the one worth doing before the screws go anywhere near a slide.
  3. Count the bosses in the slide cut, with the cover plate off. Two bosses at the front of the pocket and a bare floor behind them is the K arrangement. Four bosses, two front and two rear, is RMSc.

Counting lugs alone will not tell you K from RMR. This is the gap in the usual advice and it is worth stating plainly, because this dataset records the same two numbers for both patterns: 2 screws and 2 recoil lugs on Holosun K, and 2 screws and 2 recoil lug sockets on RMR. The discriminator between those two is size, not geometry. A K optic is a micro sight sized for a single stack carry slide; an RMR pattern optic is a full size body that will hang off the back of one. If your count comes to two and two, you have ruled out RMSc and nothing else, and the next question is which size class the part belongs to.

The size question is also where the K pattern’s parent gets people. RMSc exists at two body lengths, about 40mm and about 46mm, sharing one screw and boss layout (shieldsights.com). K lives in the 40mm class only. If you are holding something in the longer class it is not a K optic whatever the lugs say.

Pattern and dimensions

What this dataset publishes for the K pattern today:

PropertyValueSource
Mounting styleScrew-throughdataset
Mounting screws2dataset
Recoil lugs2, front only, rear pair deleteddataset
Footprint familyHolosun Kdataset
Body length classThe shorter micro class, about 40mmdataset
Optics recorded on this pattern6 pages covering 17 SKUs from 1 branddataset
Pistols cut for it directly21 of 223, from 10 brandsdataset
Pistols reaching it through a plate46, over 10 plate systemsdataset

Screw thread size, screw centre spacing, lug diameter and lug depth are not published here, for this pattern or for any other on this site. No manufacturer drawing carrying those figures has been read into the dataset, and the rule is to print a null rather than a guess. Besides Holosun’s own EPS page, the sources recorded against this footprint are third party pattern guides (opticsplanet.com, freedomgorilla.com, badassoptic.com), not a Holosun drawing. Holosun product pages are recorded against the individual optics, and they name the models; no document in this dataset publishes a dimensioned K drawing. Until one is sourced, use the screws that ship with your optic and the length the optic maker specifies for your slide.

One qualitative dimension claim is worth keeping, because it explains why the pattern exists at all: the recesses on a K body are both fewer and shallower than RMSc’s, and removing the rear pair is what allows the sealed, waterproof construction the K series is sold on. That is the reason for the modification, recorded against this footprint, and it is also why the two patterns cannot simply be treated as one.

Look-alikes that will not interchange

K against RMSc. The pair this page exists for. Same two screws, same front lug positions, rear lugs gone. The rule recorded here is directional: an RMSc cut slide needs an adapter, or the rear lugs filed down, to accept a K optic. The reverse is not recorded as a rule, and most of the K cut slides on this page are listed as taking RMSc optics as well. The RMSc hub owns the 34 optic list; this page owns the 6.

K against RMR. Two screws and two lugs on both, as above, and no relation beyond that. The RMR hub carries 35 optics against 6 here, and 18 pistols cut for it directly against 21 here. If you are comparing patterns to pick a gun rather than an optic, those two numbers are the trade in one line: RMR has the deeper optic bench, K is cut into more slides in this dataset.

K against the full size Holosun EPS. This page used to keep the full size EPS apart as its own pattern, described as the K base with extra front sockets for four lug positions, and cited Holosun’s own EPS page for it. That page says the opposite: “Direct K footprint with included RMR to K adapter plate” (holosun.com). The nine full size EPS SKUs are now filed under K, the separate pattern page is retired, and the EPS reaches every slide on this page.

K against the Holosun EPS Core. Same enclosed line, same three letters, a different mount. The EPS Core is cut for RMSc (holosun.com), not for K. If you want a sealed emitter and your slide is RMSc only, this is the model to look at rather than the EPS Carry.

K against the Holosun 509T and the dovetail patterns. The 509T clamps rather than screwing through, as does ACRO. If the optic has no through holes in its base at all, neither this pattern nor RMSc is the answer. The Docter pattern uses two screws and four lugs like RMSc but a different body again.

K against a plate system. Glock MOS and the other 30 plate systems in this dataset are not footprints. A plate drops into the slide and its top face carries a footprint. 10 of those 31 systems are recorded here as presenting K, which is the subject of the plate section below.

What this dataset records for K, and what it inherited from RMSc

This is the part a buyer should read before trusting any of the counts on this page, including ours.

All 6 K optic pages are flagged verified. 112 of the 112 optic pages in this dataset carry a verified flag, meaning the maker’s own page, or two independent retailer pages, was read and the sentence stating the footprint is recorded against the row. 6 of those 112 are K optics: the 407K-X2, the 507K-X2, the SCS Carry, the full size EPS, the EPS Carry and the Ronin EPS Carry. Each EPS page states a direct K footprint on holosun.com (EPS-RD-2, EPS-CARRY-RD-MRS): the full size EPS ships with an RMR to K adapter plate and the EPS Carry with an RMSc to K plate. Verified means a maker page states the pattern, not that it was checked on a physical sample.

Most of the 21 pistol rows are sourced for their RMSc cut, not for their K cut. 20 of the 21 are recorded as RMSc cut with the K entry alongside, and 12 of the 21 rest on a single list titled RMSc footprint compatible handguns (swampfoxoptics.com). Not one of the 21 cites a holosun.com page; the two CZ DUTY rows cite CZ’s own page, which names K among four patterns, and the GX2 TORO cites Taurus’s own mounting guide, which says its slide is “direct milled to accept optics that fit the Shield RMSC/Holosun-K footprint” (taurususa.com). The SIG 1911-XCarry is the exception in the other direction: its only source, a retailer article, calls the cut “a modified RMSc footprint a.k.a. K Series footprint” (freedomgorilla.com), so it is recorded as K only, and no SIG page for it has been found. Where the maker is silent, a third-party K entry stays on the row and is flagged; it is dropped only when the maker names a different cut. That is what happened to the Ruger MAX-9 (“Optic Pattern JPoint and Shield RMSc”, ruger.com), the Canik METE MC9 Prime and the PSA 5.7 Rock, which no longer carry K.

The dual listing is a defensible reading of how micro slides are machined, and it is still an inference rather than a cited K fitment on most rows. So: use the 21 as a strong shortlist, and confirm your specific model and generation on the maker’s page before you buy. Slide cuts change between variants of one name more often than model pages admit.

The SIG P365 line is not on this list. The dataset used to record eight SIG slides, the P365 Optic Ready, P365X, P365-XMACRO, P365 X-Macro TacOps, P365-380, P365-AXG Legion, P365-FUSE and P322, as taking K as well as RMSc, on the strength of RMSc lists and reviews. SIG’s own model pages give the optic cut as COMPACT (Shield RMSc) on every one that publishes an RX footprint, the P365-380’s page names the RMSc-pattern ROMEO-X COMPACT instead, and none names a K cut (sigsauer.com), and no Holosun K product page names a SIG pistol, so the K entries were dropped: when sources conflict, the maker’s statement wins. Each of those pistols with a recorded cut now reaches the 34 RMSc optics; the P365-FUSE carries no footprint at all, because SIG’s own page lists SIG-LOC COMPACT for its optic-less SKUs and Shield RMSc elsewhere. The P365 XL was settled the same way earlier. The dataset used to hold that SIG twice: a “P365 XL” row recorded as RMSc only and a “P365XL” row recorded as RMSc and K, the K entry resting on an RMSc list alone. SIG’s own P365 XL page gives the optic cut as COMPACT (Shield RMSc) and names no K cut (sigsauer.com), so the rows were merged into one P365 XL recorded as RMSc only, reaching 34 optics. The old P365XL address now redirects there.

How a plate gets you to Holosun K

46 pistols here reach a K optic without a K cut, across 10 plate systems, with no overlap with the 21 cut for it: 67 of the 223 pistols can carry a K optic one way or the other.

In words, a plate path works like this. The slide is milled for a proprietary pocket that is not a footprint at all. A plate drops into that pocket and its top face carries a real footprint. Buy the plate that presents K and the slide behaves, for optic buying purposes, like a K slide. The plate table for each system lives on that system’s own hub, never here.

The paths, by pistol count:

A plate also costs you height above the bore and one more interface that can loosen. If your slide is cut for K directly, that is the better mount.

How to choose a Holosun K optic

No prices on this page and no rankings the data can support. What the data does support:

Nothing on this site is verified against a physical sample. 112 of the 112 optic pages carry a verified flag and all six here are among them, each against Holosun’s own product page. Treat these fits as sourced research, then confirm against your own slide.

Where to go next

Optics with the Holosun K footprint · 6

Pistols cut for the Holosun K directly · 21

Mount it with a plate

Beretta 80X · 1 pistol

Via the Beretta 80X plate kit (Holosun K). beretta.com

Show the 1 pistol
All 1 pistol with the Beretta 80X plate system

Beretta APX A1 Carry · 1 pistol

Via the Beretta APX A1 Carry plate kit (Holosun K). beretta.com

Show the 1 pistol
All 1 pistol with the Beretta APX A1 Carry plate system

HK VP9CC · 1 pistol

Via the Heckler & Koch VP9CC optic plate 1 (Holosun K). hk-usa.com

Show the 1 pistol
All 1 pistol with the HK VP9CC plate system

Kimber KDS9c · 1 pistol

Via the Kimber KDS9c micro optic plate (Holosun K). kimberamerica.com

Show the 1 pistol
All 1 pistol with the Kimber KDS9c plate system

Springfield XD OSP · 3 pistols

Via the OEM/Aftermarket Springfield XD OSP optic plate (Holosun K). store.springfield-armory.com

Show the 3 pistols
All 3 pistols with the Springfield XD OSP plate system

Frequently asked

What optics use the Holosun K footprint?

6 optics use the Holosun K footprint, including the Holosun EPS-CARRY, Holosun EPS, Holosun 407K-X2 and Holosun 507K-X2.

How is the Holosun K footprint mounted?

The Holosun K footprint uses 2 screws and a screw through mounting style. It also incorporates 2 recoil lugs to resist rearward movement under firing.

Is the Holosun K footprint part of a larger family?

The Holosun K is its own independent footprint standard. Optics using this footprint are not cross-compatible with other footprint families unless an adapter plate is used.

Which pistols take the Holosun K with a plate?

46 pistols reach the Holosun K through an adapter plate, using the Beretta 80X, Beretta APX A1 Carry, CZ P-10 OR, FN 509 and 6 more plate systems.

What is the Holosun K footprint?

It is Holosun's micro mounting pattern: two mounting screws, two front recoil lugs and no rear lugs, with the optic screwed down through its own body into the slide. It is a deliberate modification of the Shield RMSc pattern, which carries four lugs, and deleting the rear pair is what lets Holosun seal the K series bodies. In this dataset 6 optic pages covering 17 SKUs use it, all from one brand, 21 of the 223 pistols are recorded as taking it directly and 46 more reach it through a plate.

Is the Holosun K footprint the same as RMSc?

No. They share the screw spacing and the front lug positions, which is why the two get treated as one pattern in shop listings, and they differ at the rear of the cut, which is where fitment actually fails. This dataset keeps them apart on purpose: 6 optic pages on Holosun K from 1 brand, 34 on RMSc from 14. If a listing tells you a K optic and an RMSc optic are the same mount, it is describing the screw holes and ignoring the lugs.

Will a Holosun 507K fit an RMSc cut slide?

Not as a rule, and the direction of the problem matters. A K optic has a flat rear underside, so the two rear bosses of an RMSc cut have nothing to sit in and can hold the optic off the slide. The footprint record here says an RMSc cut needs an adapter, or the rear lugs filed down, to take a K optic. The practical exception is the enclosed EPS Carry, which a Holosun mounting guide at a retailer says ships with an RMSc to K adapter plate in the box.

Which pistols are cut for the Holosun K footprint?

21 of the 223 pistols in this dataset, from 10 brands. 15 are micro or compact carry slides: the Canik METE MC9, MC9L and MC9LS, the Taurus GX4 series and GX2 TORO, the FN Reflex pair, the Shadow Systems CR920s, the Palmetto State Armory Dagger Micro, the S&W Equalizer and M&P 5.7, and the SIG 1911-XCarry. The other two are the CZ DUTY 4.0 C and 4.0 F, whose pin-set interface CZ lists for RMR, RMSc, DeltaPoint Pro and Holosun K. The full list is in the pistols section above. 46 more pistols reach the pattern through a plate. The Ruger MAX-9, Canik METE MC9 Prime and PSA 5.7 Rock are not among them: each maker names the Shield RMSc pattern only.

How many optics fit a Holosun K cut pistol?

40 of the 112 optic pages here, on 18 of the 21. That is the 6 K optics plus the 34 RMSc optics, because those 18 slides are recorded as accepting both patterns directly. The two CZ DUTY slides take RMR and DeltaPoint Pro directly as well and reach 91. The SIG 1911-XCarry is recorded as K only and reaches the 6. A pistol cut for RMSc alone reaches 34, so in this dataset the K cut is worth 6 extra optics rather than a different shopping list. 14 of the 40 have enclosed emitters.

What is the difference between the Holosun EPS and the EPS Carry?

Size and window, not mount. Holosun lists both on the K footprint: its full size EPS pages say 'Direct K footprint with included RMR to K adapter plate', so both sit on this page. The EPS Core is the odd one out: it is an RMSc optic, which is why it reaches more slides than any K model. Buy on the footprint, not on the family name.