Springfield XD OSP optic footprint and plates

The Springfield XD OSP is a plate system, not an optic footprint. 3 pistols use it, and its plates present the DPP, Docter, Holosun K, RMR and RMSc footprints.

Springfield Armory XD/XD-M OSP optic-mounting-plate system. Used on the XD-M Elite OSP (also XD-M OSP, XD Mod.2 OSP, XD Mod.3 OSP). Five screw-mounted plates present the Docter, Shield (RMSc), Leupold DeltaPoint Pro, Trijicon/Holosun RMR and Holosun K footprints. No ACRO plate is offered.

Plate system

Springfield XD OSP

Family:
Springfield XD/XD-M OSP plate system
Screw count:
not recorded
Mounting:
proprietary_plate
Optics:
0
Pistols:
3

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

Four parts, five patterns: reading Springfield’s plate numbers

The table further down this page lists five plate paths, one per pattern. Springfield does not sell five parts. Its XD OSP plate listing, store SKU XD507, offers four numbered plates, and it names each one by footprint (store.springfield-armory.com):

Springfield plateSpringfield’s footprint labelRetail part numberPatterns recorded hereOptic pages
Plate 1Docter, Vortex, Burris, Springfield StandardXD5071Docter6
Plate 2Shield / DPP (Leupold/Shield)XD5072RMSc and DeltaPoint Pro50
Plate 3Trijicon / HolosunXD5073RMR35
Plate 4Holosun K SeriesXD5075Holosun K6

So the RMSc row and the DeltaPoint Pro row in the plate table below are the same part. That one plate is the widest door into this system: the 34 RMSc pages plus the 16 DeltaPoint Pro pages make 50, from 16 of the 17 optic brands this pistol can reach. The only brand Plate 2 does not cover is Trijicon, which sits behind Plate 3. Count the patterns and the answer is five; count what you put in the shopping cart and it is four.

The part numbers come from retailer listings rather than from Springfield’s own listing, which shows only the umbrella SKU: Midwest Gun Works lists XD5071 as the Springfield Standard, Vortex and Burris plate, XD5072 as the Springfield Micro, Leupold and Shield plate and XD5073 as the Trijicon and Holosun plate (midwestgunworks.com, midwestgunworks.com, midwestgunworks.com), and OpticsPlanet lists XD5075 as the Holosun K plate (opticsplanet.com). Springfield confirms one of them first party: its XD OSP slide assembly page says every kit ships with one XD5072 plate (store.springfield-armory.com). No XD5074 turned up anywhere, so treat the gap in the numbering as a gap, not a missing plate.

Note what the labels do. Springfield’s Plate 1 label names Vortex and Burris, not a pattern most buyers search for, and the Docter pattern is the one this site files those optics under. Its Plate 3 label names Holosun next to Trijicon, but Plate 4 is also Holosun. The brand on the label is not the decider; the pattern is.

How to tell an XD OSP slide from the Springfields that look like it

Springfield uses “OSP” (Optical Sight Pistol) across more than one product line, and the letters on the slide do not tell you which mounting answer you own. Three checks, each from Springfield’s own pages, settle it.

Check 1: count the screws in the cover plate. On an XD OSP pistol the cover is a filler plate held by three M3 anchoring screws that take a T10 Torx key, and Springfield’s XD-M manual tells you to keep those screws with the filler plate because the same three hold the optic plate in afterwards (support.springfield-armory.com). Three screws through a flat cover is this system.

Check 2: is it an XD-S Mod.2 OSP? That single-stack pistol is the commonest mix-up. Springfield describes its slide as milled in the Springfield Micro footprint (HEX Wasp, Shield RMSc and SMSc), with the optic mounting directly and no mounting plate required, and the cover it ships with is a polymer cover plate (springfield-armory.com). So the XD-S Mod.2 OSP is recorded here as an RMSc pistol, and no XD OSP plate belongs on it. The same goes for the Hellcat OSP, milled for RMSc.

Check 3: pins or a 1911 frame? Two small removable pins under the cover mean an Echelon and its Variable Interface System. A 1911 with an optic plate is the Springfield AOS system. Neither shares parts with this pocket.

What is left after those checks, a double-stack striker XD-M, XD-M Elite or XD Mod pistol with a three-screw cover, is the system on this page. The three recorded here are the XD-M Elite OSP, the XD-M OSP and the XD Mod.3 OSP.

An original XD with no cut at all cannot take a plate, because the pocket is in the slide. Springfield’s answer is a replacement slide: its XD OSP 9mm slide assembly fits 4 inch and 5 inch original full-size XD pistols, comes with a cover plate, is cut for the OSP plates and ships with one XD5072 plate, and Springfield states it is not compatible with the XD Mod.2, XD-M, XD-M Elite, XD-S, XD-S Mod.2 or XD-E (store.springfield-armory.com). A converted original XD is not a pistol this dataset records, so no fit is claimed for one, but the parts it takes are the parts on this page.

Screws, threads and what Springfield publishes

A plate system has no fastener geometry of its own: each plate carries the pattern of the optic it presents. That is why this record’s screw count reads “not recorded” in the panel above, and why the dimensions that matter are the pocket hardware and the screw rules. Springfield’s XD-M manual publishes these, in its OSP plate installation section (support.springfield-armory.com):

ItemWhat the manual says
Plate screws3 M3 anchoring screws, the same 3 that held the cover plate
DriverT10 Torx (six point) key
Thread lockerRemovable, such as Loctite 242, used sparingly and on screws only
Optic screw protrusionNo more than 0.095 inch (2.4mm) from the bottom of the sight system
Test fitFit the sight to the plate first with the sight’s own screws, and shorten any screw that protrudes below the plate
TorqueNot published in the manual
Pocket and plate dimensionsNot published

Two cautions sit in that same section and are worth reading before you order screws. The step-by-step tells you to install the optic with 6-48 screws, while the paragraph above it says each plate is optimized for a specific sight and that other sights need screws with the same thread pitch the plate incorporates, and a closing note warns of variations in thread pitch, length and head geometry between plates. Read that as: the screw that fits is decided by the plate and the optic, not by the pistol, so match the plate’s thread and confirm length against the 0.095 inch limit rather than reusing screws from another gun. Springfield does not publish a per-plate thread table, and neither does this site.

The patterns themselves have published counts on their own hubs. Every one of the five uses 2 screws; RMR and Holosun K seat on 2 front recoil lugs, and RMSc, DeltaPoint Pro and Docter on 4. Those figures belong to the footprint records linked from the plate table, not to this pocket.

Which plate is already in the box

Before buying anything, check what came with the pistol, because Springfield has shipped the system three different ways.

None of those lists names a Holosun K plate. Plate 4 arrived later as a separate purchase, which matters to anyone who bought an XD-M years ago and assumes the case holds every option.

Springfield’s tested-optic chart, set against this dataset

Springfield’s plate listing carries an optic compatibility chart of optics it says have been tested for fitment, and it warns that the chart is not a complete list of every red dot on the market (store.springfield-armory.com). Most of it agrees with the patterns recorded here: its Plate 2 rows include the Shield RMSc, SMSc, SMS2 and RMSX, the EOTech EFLX, the Crimson Trace CTS-1550, the Swampfox Sentinel and the Vortex Defender ST, XL and CCW, all filed here as RMSc or DeltaPoint Pro optics; its Plate 3 rows include the Trijicon RMR and SRO and the Holosun 407C-X2 and 507C-X2, all RMR here; its Plate 4 rows include the Holosun 407K, 507K, EPS Carry and the full-size EPS, all Holosun K here, the EPS because Holosun’s own page calls it a direct K footprint optic (holosun.com).

Two rows do not agree, and neither of them is a fit claim on this site.

  1. Holosun 509T, listed under Plate 3. This dataset files the 509T on its own Holosun 509T pattern, which reaches 56 pistols here through plates on 8 other plate systems and no XD OSP pistol.
  2. Primary Arms SLx RS-10, listed under Plate 3. This dataset files the SLx RS-10 as a Docter optic, which is Plate 1, and files the separate SLx RS-10R as RMR.

Each is either a gap in this dataset or a chart row that needs a closer read, and each is queued for verification against the optic maker’s own page. Until then the answer printed on this site is the one in the plate table: if a pattern is not one of the five rows below, no XD OSP fit is claimed for it.

The plate paths, in words

Plate 3, the RMR path, is the deepest single list. 35 optic pages, 16 of them Holosun, plus Trijicon’s own RMR and SRO. It is the deep list and the narrow one: 8 brands on 35 pages.

Plate 2 is the widest. Its two patterns add up to 50 pages and 15 of the system’s enclosed-emitter options, and it is the plate Springfield chooses to ship with its slide conversion kit. If you have not bought an optic yet, this is the plate that leaves the most choice open.

Plate 1, the Docter path, is small and well sourced. 6 pages. It is the only route on this pistol to the Vortex Venom and Viper and the Burris FastFire 3 and 4.

Plate 4, the Holosun K path, is the only K plate Springfield makes. 6 pages, all Holosun, the full-size EPS among them. 10 of the 31 plate systems in this dataset present the K pattern, Beretta, C&H Precision, HK and Kimber plates among them, so the K pattern reaches 21 pistols milled for it and 46 more through a plate. On a full-size XD this is the only way onto a sealed Holosun of that family.

There is no ACRO plate. Springfield’s list stops at four, and none of them presents ACRO, so no ACRO pattern optic mounts here on any recorded path. Together the four plates reach 97 of the 112 optic pages on this site, which is the reach every one of the 3 pistols on this page shares. The fuller argument for what each path buys, and what the missing ACRO plate costs, is in the XD OSP plate guide.

Buying guidance, in order

No prices that will not hold and no rankings the data cannot support. Springfield’s own store listed each plate at $25.00 when read on 2026-10-26 (store.springfield-armory.com); treat that as dated, not as a quote.

  1. Run the three checks above. An XD-S Mod.2 OSP, a Hellcat OSP or an Echelon does not take this plate, whatever the slide says.
  2. Open the case. An XD-M Elite OSP may already hold Plates 1 to 3, and an XD-M OSP package may hold the optic-named plates listed above.
  3. Pick the optic, read its pattern, then order by plate number. Plate 2 for RMSc or DeltaPoint Pro, Plate 3 for RMR, Plate 1 for Docter, Plate 4 for Holosun K.
  4. If you have not chosen an optic, start from Plate 2. 50 of the 97 reachable pages sit behind it.
  5. If a Holosun K optic is the goal, Plate 4 is the path. Check the Holosun K hub for which optics carry the pattern before assuming a Holosun model name tells you.
  6. Budget for screws. Use screws matched to the plate’s thread and check length against the 0.095 inch limit before the first range trip, then test fire as the manual says.

What is still open on this system

Where to go next

Pistols with the Springfield XD OSP system · 3

Plates available

Presents Plate Sources Optics that fit
DPP OEM/Aftermarket Springfield XD OSP optic plate (DPP) store.springfield-armory.com 16 optics
Docter OEM/Aftermarket Springfield XD OSP optic plate (Docter) store.springfield-armory.com 6 optics
Holosun K OEM/Aftermarket Springfield XD OSP optic plate (Holosun K) store.springfield-armory.com 6 optics
RMR OEM/Aftermarket Springfield XD OSP optic plate (RMR) store.springfield-armory.com 35 optics
RMSc OEM/Aftermarket Springfield XD OSP optic plate (RMSc) store.springfield-armory.com 34 optics

Frequently asked

Which pistols use the Springfield XD OSP system?

3 pistols use the Springfield XD OSP plate system, including the Springfield Armory XD Mod.3 OSP, Springfield Armory XD-M Elite OSP and Springfield Armory XD-M OSP.

Which optics fit the Springfield XD OSP?

Its plates present the DPP footprint (16 optics), Docter footprint (6 optics), Holosun K footprint (6 optics), RMR footprint (35 optics) and RMSc footprint (34 optics). Pick the plate for the footprint your optic uses.

Do I need a plate?

Yes. The Springfield XD OSP does not take an optic directly. Fit one of its plates: OEM/Aftermarket Springfield XD OSP optic plate (DPP), OEM/Aftermarket Springfield XD OSP optic plate (Docter), OEM/Aftermarket Springfield XD OSP optic plate (Holosun K), OEM/Aftermarket Springfield XD OSP optic plate (RMR) and 1 more.

Is there a Springfield XD OSP footprint?

No. The XD OSP is a factory plate system: the slide carries a pocket cut for a Springfield plate, and the plate you screw into it is what presents a real footprint to the optic. That is why this record publishes no screw count and no recoil lug count of its own. Springfield sells four plates for the pocket, and this dataset records the five patterns they present: RMR, RMSc, DeltaPoint Pro, Docter and Holosun K.

Which XD OSP plate number do I need for my red dot?

Springfield numbers the plates by footprint. Its store lists Plate 1 for the Docter footprint, Plate 2 for Shield and DPP, Plate 3 for Trijicon and Holosun (the RMR pattern) and Plate 4 for the Holosun K series. Read your optic's pattern off its own page, then order the plate number that names it. In this dataset Plate 2 opens the most optic pages, 50, because it covers two patterns.

Does the XD-S Mod.2 OSP use XD OSP plates?

No. Springfield describes the XD-S Mod.2 OSP slide as milled in its Springfield Micro footprint, the Shield RMSc and SMSc pattern, with the optic mounting directly and no mounting plate required. When no optic is fitted it takes a polymer cover plate. It is recorded here as an RMSc pistol with direct-fit optics, a different answer from the three XD OSP plate pistols, so buy for it by footprint and not from the XD OSP plate listing.

What screws hold an XD OSP plate in the slide?

Three M3 screws with a T10 Torx head. Springfield's XD-M manual has you remove those three screws to take off the cover plate and then reuse the same three to install the optic plate, with removable thread locker such as Loctite 242 applied sparingly if needed. The optic's own screws must not protrude below the bottom of the plate, and the manual caps protrusion at 0.095 inch (2.4mm). Springfield does not publish a torque figure in that manual.

Do XD OSP plates fit the XD Mod.4 OSP?

For three patterns, on Springfield's word. Its XD Mod.4 OSP page says OSP plates sold in its store fit the RMR, DeltaPoint Pro and Docter footprints, and it links the XD OSP plate listing. The plate listing's own compatibility list, read on 2026-10-26, still names only the XD-M OSP, XD-M Elite OSP, XD Mod.2 OSP and XD Mod.3 OSP. So the Mod.4 is recorded here on its own plate record with those three plates only, and no Shield or Holosun K plate fit is claimed for it. Confirm with Springfield before ordering a Plate 2 or Plate 4 for one.

Can an original XD without an optic cut take an XD OSP plate?

Not as it stands, because the pocket is in the slide. Springfield sells an XD OSP 9mm slide assembly for 4 inch and 5 inch original full-size XD pistols, cut for the OSP plates, and says every kit ships with one XD5072 plate. It also states the assembly does not fit the XD Mod.2, XD-M, XD-M Elite, XD-S, XD-S Mod.2 or XD-E. A converted original XD is not one of the pistols recorded here, so this site claims no fit for one.