The Holosun 509T footprint

The Holosun 509T is a pistol optic footprint that mounts with 0 screws (dovetail_clamp). 2 red dot optics use the Holosun 509T footprint, including the Holosun AEMS-MACRO and Holosun HE509T-X2. It also mounts on 56 more pistols through an adapter plate.

Holosun 509T enclosed-emitter pattern. Unique tool-less clamp-style interface - the optic body has no top-down screw holes; instead a clamp-and-rail mechanism (similar in concept to ACRO but with different dimensions and NOT cross-compatible) attaches to a dedicated 509T cut or adapter plate. Ships in-box with an RMR adapter plate so it can be installed on RMR-pattern slides at the cost of added optical height.

Footprint

Holosun 509T

Family:
Holosun 509T
Screw count:
0
Mounting:
dovetail_clamp
Optics:
2
Pistols:
0 direct · 56 via plate

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

The 509T footprint is Holosun’s clamp-style mount for its enclosed 509T optics, and 0 of the 223 pistols in this dataset are milled for it: all 56 pistols that can take one get there through an adapter plate. The optic body has no screw holes running top to bottom. It locks onto a 509T cut or plate, which is why a screw-pattern slide cannot take it bare. Holosun’s AEMS Macro page lists the fitment as “509T Footprint”, and its HE509T-X2 page says the optic “Includes RMR-to-509T adapter plate for broad pistol mounting compatibility”. 2 optic pages here use the pattern, both Holosun, including the Holosun HE509T-X2; the full list is in the optics section above.

How to identify a 509T optic or plate

  1. Look for screws on top of the optic. A screw-pattern optic such as an RMR or RMSc body shows its mounting screw heads from above. A 509T body shows none, because the clamp does the holding.
  2. Read the model name. Holosun puts 509T in the name of the pattern’s namesake optic. The AEMS Macro is the other optic recorded on it here, so the name alone does not settle every case; Holosun’s fitment line does.
  3. Read the plate, not the slide. Every 509T fit in this dataset is a plate fit, so the part that matters is the plate’s own listing. C&H Precision, for example, sells its FN plate as “FN 509, FN 510, and FN 545 V4 MIL / LEO to Holosun 509T” and warns that the plate “will not work with the Holosun HE509-RD ACSS Vulcan” (chpws.com). A 509T plate is bought for one optic family, not for a whole size class.

Look-alikes that will not interchange

The pattern most often confused with the 509T is ACRO. Both are enclosed, both clamp rather than screw through, and both need a plate on almost every pistol. They are still different mounts: the footprint record here describes the 509T as similar in concept to ACRO, with different dimensions, and not cross-compatible. Buy the plate for the exact pattern.

The overlap between the two runs the other way too. All 8 plate systems in this dataset that present the 509T also have an ACRO path recorded, so an owner of one of these pistols can choose between the two enclosed patterns by optic rather than by gun.

How a plate gets you to the 509T

The 509T reaches 56 pistols over 8 plate systems, and the plate table above lists each plate and its maker. In words: five of the eight are C&H Precision plates, on the S&W M&P CORE, FN 509, CZ P-10 OR, HK VP9 OR and SIG P320 cuts; the HK VP9A1 plate is recorded to HK, the Walther PDP 2.0 plate to Walther, and the Staccato HD HOST plate to Staccato. The P320 path covers the 5 P320 models recorded for that plate, not the whole P320 line.

The in-box RMR to 509T plate is a separate route that this dataset does not count. It turns any RMR pattern slide into a 509T mount, with more height than a dedicated plate, but it is not a recorded fit, so no RMR-cut pistol appears in the 56. If your slide is cut for RMR, read the RMR hub and the optic’s own fitment line before you buy.

Where to go next

The footprint index compares the 509T with every other pattern and plate system here. If you are choosing between the two enclosed clamp patterns, the ACRO footprint guide covers the plate side of that decision in depth.

Optics with the Holosun 509T footprint · 2

Mount it with a plate

HK VP9A1 · 3 pistols

Via the Heckler & Koch VP9A1 optic plate (Holosun 509T). hk-usa.comhk-usa.comhk-usa.com

Show the 3 pistols
All 3 pistols with the HK VP9A1 plate system

Staccato HD HOST · 5 pistols

Via the Staccato HD HOST plate (Holosun 509T). staccato2011.com

Show the 5 pistols
All 5 pistols with the Staccato HD HOST plate system

Frequently asked

What optics use the Holosun 509T footprint?

2 optics use the Holosun 509T footprint, including the Holosun AEMS-MACRO and Holosun HE509T-X2.

How is the Holosun 509T footprint mounted?

The Holosun 509T footprint uses no screws and a dovetail clamp mounting style. It also incorporates 1 recoil lug to resist rearward movement under firing.

Is the Holosun 509T footprint part of a larger family?

The Holosun 509T is its own independent footprint standard. Optics using this footprint are not cross-compatible with other footprint families unless an adapter plate is used.

Which pistols take the Holosun 509T with a plate?

56 pistols reach the Holosun 509T through an adapter plate, using the CZ P-10 OR, FN 509, HK VP9 OR, HK VP9A1 and 4 more plate systems.

What is the 509T footprint?

It is the mount Holosun uses on its enclosed HE509T-X2 and AEMS Macro: a clamp-style interface with no screw holes through the optic body, which locks onto a dedicated 509T cut or a 509T adapter plate. Holosun's AEMS Macro page lists its fitment simply as '509T Footprint'. In this dataset 2 optic pages use it, no pistol is cut for it directly, and 56 of the 223 pistols reach it through a plate.

Does the Holosun 509T fit an RMR cut?

Holosun ships an RMR to 509T adapter plate in the box with the HE509T-X2 and the AEMS Macro, per its own product pages, so the optic can sit on an RMR pattern slide at the cost of extra height. This dataset does not count that in-box plate as a fit path: the 56 pistols recorded here reach the 509T through a plate system, and a slide milled only for RMR is not among them unless its own plate system sells a 509T plate.

Is the 509T footprint the same as ACRO?

No. Both are clamp-style enclosed patterns with no top-down screws, and that is where the similarity ends. The footprint record here keeps them apart because the dimensions differ and neither optic fits the other's mount. A plate has to be bought for the exact pattern: an ACRO plate will not take a 509T, and a 509T plate will not take an ACRO.

Which pistols can take a Holosun 509T?

56 of the 223 here, all through a plate, across 8 plate systems: the S&W M&P CORE (14 pistols), FN 509 (12), Walther PDP 2.0 (7), CZ P-10 OR (5), HK VP9 OR (5), the C&H plate for the SIG P320 (5), HK VP9A1 (3) and Staccato HD HOST (5). No pistol in this dataset has a slide milled for the 509T itself.