Taurus TORO optic footprint and plates

The Taurus TORO is a plate system, not an optic footprint. 7 pistols use it, and its plates present the C-More STS, DPP, Docter and RMR footprints.

Taurus Optic Ready Option (TORO) pistols ship with a multi-plate kit rather than a single milled footprint. The plates present the RMR, DeltaPoint Pro, Docter and C-More STS patterns.

Plate system

Taurus TORO

Family:
Taurus TORO multi-plate system
Screw count:
not recorded
Mounting:
proprietary_plate
Optics:
0
Pistols:
7

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

Plates 01 to 04: reading Taurus’s own plate table

The Taurus TORO is a factory plate system. Its plates, not the slide, decide which optic mounts, and Taurus documents them better than most makers do. The G3 and G3c owner’s manual carries a table titled “Taurus Pistols Mount Plate & Screw Type” and says plainly that “the type is marked on the top of each mount plate” (taurususa.com). The plates are stamped 01 to 04, so a loose plate in a drawer identifies itself.

Here is that table set against the patterns this site records:

Taurus’s retail listing for the replacement kit uses the same four groups and the same order of thinking, naming each plate by the optics it carries rather than by a pattern name: “Trijicon RMR / Holosun”, “Leupold Delta Point Pro”, “Vortex Venom/ Doctor Noblex / Burris Fast Fire/ Sightmark Mini” and “C-More STS”, sold as one kit under Taurus SKU 10028171 (shoptaurus.com). That listing is the document every plate row on this page cites.

The translation matters because Taurus names optics and this site names patterns. An owner who knows their sight is Docter-pattern will not find the word on a plate; they need plate 01. An owner with a Holosun 507C will not find the 507C in Taurus’s table at all, because Taurus names the 407C; the 507C is recorded on the same RMR pattern here, so it is plate 02 as well.

How to tell a TORO plate pocket from a milled TORO slide

Taurus uses the TORO name on two unrelated interfaces, and the model list that separates them is on the TORO plate-system guide. What follows is how to confirm it on the gun in your hand, from Taurus’s own documents.

What was in the box. Taurus says the G3 TORO and G3c TORO ship with “four different mounting plates, along with four different sets of screws and L-Key”, and a steel slide cover for running irons (taurususa.com). Four numbered plates means a plate pocket. A single flush cover and nothing else means a milled slide: Taurus describes the GX4 TORO as shipping with “a flush-mount slide cover plate”, installed by removing the cover and securing the optic “with the screws supplied with your optic of choice” (taurususa.com).

How the cover comes off and what goes back. On a G3 TORO the cover is held by 2 screws, and a numbered plate goes into the recess before the optic does. On a GX2 TORO, Taurus’s install guide has the optic sit directly on the slide and reuses “the same screws that held the slide cover plate on” (taurususa.com). If the optic can sit in the cut with nothing between it and the steel, the slide is milled and this page is not your system.

Where the plate sits on a TX22 Competition. This is the one TORO plate pistol whose plate is not in the slide at all. Taurus describes “a 5-inch bull barrel with the breech end machined to accept a base mounting plate”, with “2 small adapter plates” that “provide 4 different mounting patterns” (taurususa.com). The optic rides on the barrel through a skeletonized slide. Same four patterns, different parts.

The TX9. Taurus says the TX9 is “optics-ready right out of the box, utilizing the existing Taurus T.O.R.O. System” (taurususa.com), which is why the three TX9 sizes sit on this system with the G3 family. A TX9 plate table was not read this run, so whether its plates carry the same 01 to 04 stamps is not confirmed here.

Screws, torque and what Taurus publishes

This system record publishes no screw count and no recoil lug count, and both are left blank rather than set to 0. The manual fills in what a buyer actually needs:

All of that is from the G3 and G3c owner’s manual cited above. What Taurus does not publish, and this site does not guess: the thread size of the type A, B and C screws, their lengths, the plate thickness and the dimensions of the recess. The one thread that is stated is the #6-32 on plate 02, and it belongs to the optic maker’s screw.

The torque figure is specific to this interface. Taurus’s GX2 TORO guide says “you should torque the screws to 15 inch-pounds” on that milled slide, nearly twice the plate figure. A plate stack and a direct cut are different joints; use the number the maker gives for the one you own.

The geometry that does vary by plate sits on the four pattern hubs, each with its own cited counts: RMR, DeltaPoint Pro, Docter and C-More STS.

The look-alikes that cost money on this system

A FastFire that is not on plate 01. Taurus names the Burris FastFire on plate 01, and the FastFire 3 and FastFire 4 are recorded here on the Docter pattern, so that holds. The FastFire C is recorded on RMSc and the FastFire E on ACRO, and no TORO plate presents either pattern. Same product family, no path.

A K where a C should be. Plate 02 is named for the Holosun HS407C. The 407K and 507K are on the Holosun K pattern, and none of the four plates presents it. Owning a K-series sight and reaching for plate 02 because the model number looks close is the most predictable mistake on this pistol.

C-More’s own STS2. Taurus built plate 03 for the C-More STS2, and that optic is not a page in this dataset. The single optic recorded on the C-More STS pattern here is a Primary Arms sight, so plate 03 leads to 1 page on this site, not to a C-More catalogue.

Optics Taurus names that this site does not carry. The Sightmark Mini, Noblex, TRUGLO TRU-TEC Micro and Bushnell RXS-250 appear in Taurus’s compatibility lists. The RXS-250 is a page here, on the DeltaPoint Pro pattern, which agrees with the TX22 Competition release grouping it with the Leupold DeltaPoint Pro. The other three are not, so no fit is published for them on any pistol.

The G3 kit on a TX22 Competition. The patterns match; the parts, by Taurus’s description, do not. Buy plates sold for the pistol you own.

A milled TORO plate. Taurus’s GX4 page lists a “Trijicon RMR cc Red Dot (with the optional adapter plate)” for that slide. That adapter is not one of the four plates on this page and is not a path in this dataset. The GX4 family’s own record is on the RMSc and Holosun K hubs, and Taurus’s GX4 page names the “Shield RMSc” and “Holosun HS507K and HS407K”, which is the first maker statement read for that K entry.

The plate paths, in words

Four plates, four patterns, no overlap, because every optic page here carries exactly one pattern. Plate 02 (RMR) carries 35 pages, plate 04 (DeltaPoint Pro) 16, plate 01 (Docter) 6 and plate 03 (C-More STS) 1, for 58 of the 112 optic pages on the site. Every one of the 7 pistols on this system reaches the same 58, because they share the four paths and none has an optic cut of its own.

What the four plates do not present is just as definite: RMSc, Holosun K, ACRO and Holosun 509T. The largest of those is RMSc at 34 pages, and the full gap analysis lives in the plate-system guide linked above rather than here. The Beretta 90-Series kits present exactly the same four patterns, so a 92-series owner and a G3 TORO owner shop from the same 58 pages through different parts.

Buying guidance, in order

No prices and no rankings the data cannot support. A sequence instead.

  1. Confirm the interface with the box-contents and cover tests above. A milled TORO owner should leave this page for the RMSc hub.
  2. Choose the optic, then read its pattern off its own page. Not off the product name: the FastFire and the 407C/407K pairs above are why.
  3. Match the pattern to the plate number: Docter is 01, RMR is 02, C-More STS is 03, DeltaPoint Pro is 04. The number is stamped on the plate.
  4. Get the right screws. Plates 01, 03 and 04 use the kit’s type A, C and B screws. Plate 02 uses the #6-32 screws that came with the optic, so keep them when you unbox it.
  5. Torque to 8.2 in-lbs with Loctite 242, and wait 24 hours before shooting, per the G3 and G3c manual.
  6. Replacing lost plates on a G3, G3c or G3 Tactical: the Taurus kit above is the factory part. On a TX22 Competition, ask Taurus for the barrel-mount plates rather than the slide kit.
  7. If you want an enclosed emitter, 9 of the 58 pages are enclosed, and they split between plate 02 and plate 04. Decide the optic first and the plate follows.

What is still open on this system

Stated plainly, because a plate page is only as good as its sourcing.

One listing carries all four paths. Every plate row cites the Taurus kit listing. This page adds the G3 and G3c manual, which corroborates the same four plates from the maker, and the manual is not yet recorded in the dataset.

The TX22 Competition is filed under the G3 kit’s plate rows while Taurus describes its own barrel-mounted hardware. The fits do not move, since the patterns are the same, but under the rule that a plate applies only to the pistols its maker names, that pistol belongs on a record of its own. That is a data change, queued, not made here.

The GX2 TORO. Taurus’s install guide says the GX2 slide is “direct milled to accept optics that fit the Shield RMSC/Holosun-K footprint”. The GX2 record here now carries both patterns on that statement, so Holosun K optics are published as direct fits on the GX2 beside the RMSc ones.

Verification. All 58 optic pages this system reaches carry a verified flag, part of 112 of the 112 optic pages verified site-wide. Nothing here comes from a physical sample.

Where to go next

The cited optic list for each plate lives on its pattern hub: RMR, DeltaPoint Pro, Docter and C-More STS. The plate table below links each one.

For the pistols themselves: the G3 TORO, G3c TORO, TX22 Competition and TX9 Full. For the milled side of the TORO name, the GX2 TORO and GX4 TORO. For the whole Taurus lineup, the gap analysis and how TORO ranks against the other plate systems, read the Taurus TORO plate guide, and for the plate question in general, do you need an adapter plate. Every footprint and plate system on the site is indexed at all footprints.

Pistols with the Taurus TORO system · 7

Plates available

Presents Plate Sources Optics that fit
C-More STS OEM/Aftermarket Taurus TORO multi-plate system optic plate (C-More STS) shoptaurus.com 1 optic
DPP OEM/Aftermarket Taurus TORO multi-plate system optic plate (DPP) shoptaurus.com 16 optics
Docter OEM/Aftermarket Taurus TORO multi-plate system optic plate (Docter) shoptaurus.com 6 optics
RMR OEM/Aftermarket Taurus TORO multi-plate system optic plate (RMR) shoptaurus.com 35 optics

Frequently asked

Which pistols use the Taurus TORO system?

7 pistols use the Taurus TORO plate system, including the Taurus G3 TORO, Taurus G3 Tactical TORO, Taurus G3c TORO and Taurus TX22 Competition.

Which optics fit the Taurus TORO?

Its plates present the C-More STS footprint (1 optic), DPP footprint (16 optics), Docter footprint (6 optics) and RMR footprint (35 optics). Pick the plate for the footprint your optic uses.

Do I need a plate?

Yes. The Taurus TORO does not take an optic directly. Fit one of its plates: OEM/Aftermarket Taurus TORO multi-plate system optic plate (C-More STS), OEM/Aftermarket Taurus TORO multi-plate system optic plate (DPP), OEM/Aftermarket Taurus TORO multi-plate system optic plate (Docter) and OEM/Aftermarket Taurus TORO multi-plate system optic plate (RMR).

What do the numbers on Taurus TORO plates mean?

They are the plate number, and Taurus says the type is marked on the top of each mount plate. In the G3 and G3c owner's manual, plate 01 carries the Docter group (Docter, Noblex, Vortex Venom, Burris FastFire, Sightmark Mini), plate 02 the Trijicon RMR and Holosun HS407C, plate 03 the C-More STS2 and plate 04 the Leupold DeltaPoint. On this site those four plates are the Docter, RMR, C-More STS and DeltaPoint Pro paths, reaching 6, 35, 1 and 16 optic pages.

Which Taurus TORO plate do I use for an RMR or a Holosun 507C?

Plate 02. Taurus lists the Trijicon RMR and Holosun HS407C on it, and every Holosun 407C and 507C page in this dataset is recorded on the RMR pattern, so the same plate serves them. It is also the one plate with no screws of its own in the kit: Taurus's table says to use the original #6-32 screws supplied by the optic's manufacturer.

What torque do Taurus G3 TORO optic screws take?

8.2 in-lbs, on two screws, with a small amount of Loctite 242 and 24 hours of cure time before firing, per the G3 and G3c owner's manual. Do not carry that number to a milled Taurus slide: Taurus's own GX2 TORO install guide gives 15 inch-pounds for that pistol, which bolts the optic straight to the slide with the cover-plate screws and has no plate in between.

Does the G3 TORO plate kit fit a TX22 Competition?

Do not assume so. Taurus describes the TX22 Competition's mount as a base mounting plate on the breech end of the barrel with 2 small adapter plates that provide 4 mounting patterns, which is different hardware from the four slide plates in the G3 kit, and the kit listing names only the G3c and G3. The patterns line up (RMR, C-More STS2, the Venom and Docter group, and DeltaPoint Pro), which is why the TX22 Competition shares this system's 58 optic pages, but buy plates sold for the TX22 Competition.

Is there an RMSc plate for a Taurus G3 TORO?

Not in the factory kit and not in this dataset. None of the four plates Taurus ships presents the RMSc pattern, and none presents Holosun K, ACRO or Holosun 509T either, so the 34 RMSc pages and the 6 Holosun K pages here have no path onto a G3, G3c, G3 Tactical, TX22 Competition or TX9. If an RMSc sight is the requirement, the milled Taurus slides are the ones cut for it.

Will a Burris FastFire fit a Taurus TORO plate?

The FastFire 3 and FastFire 4 will, on plate 01, because both are recorded here on the Docter pattern and Taurus names the Burris FastFire on that plate. The name is the trap: the Burris FastFire C is recorded on RMSc and the FastFire E on ACRO, and neither of those patterns has a TORO plate, so a FastFire C or E has no path onto a TORO plate pistol in this dataset.