Beretta 90-Series optic footprint and plates

The Beretta 90-Series is a plate system, not an optic footprint. 5 pistols use it, and its plates present the C-More STS, DPP, Docter and RMR footprints.

Beretta sells a separate plate kit per footprint for its 90-Series RDO slides (92X, 92XI, 92GTS and M9A4 families). The kits recorded here present the Docter (Burris/Docter/Vortex), RMR (Trijicon), DeltaPoint Pro (Leupold) and C-More patterns. Beretta's ACRO kit lists fewer models, so it has its own record.

Plate system

Beretta 90-Series

Family:
Beretta 90-Series RDO plate system
Screw count:
not recorded
Mounting:
proprietary_plate
Optics:
0
Pistols:
5

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

What the Beretta 90-Series plate system is

The Beretta 90-Series RDO slide is a plate system, not a footprint. Beretta mills the 92-family RDO slides with one factory cut and sells a separate plate kit for each optic pattern. The kit you bolt in decides which optic mounts. Beretta’s own user manual for the 92XI and 92GTS calls the part that ships in the cut a “Red dot optics blanking plate” and says that “To purchase optic plates, please see www.Beretta.com” (Beretta 92XI and 92GTS user manual). So the pistol arrives ready for a plate, and the plate is a separate purchase.

This site records 5 pistols on the system: the 92GTS, the 92X Performance, the 92X RDO Compact, the 92X RDO Full Size and the 92XI. It records 4 plate kits on this hub and one more, the ACRO kit, on a hub of its own, the Beretta 90-Series ACRO kit. The ACRO kit is split out because Beretta lists it for fewer models than the other four, so it cannot be counted as part of every 90-Series slide.

How to identify a 90-Series RDO slide and its plate

Four checks settle it without a caliper.

  1. Is the slide cut at all? An RDO slide has a pocket just ahead of the rear sight closed by a flat blanking plate held by two small countersunk screws. A 92 with only a rear sight in a dovetail and no pocket is not on this system. Beretta sells a different part for those guns, a dovetail base that replaces the rear sight on the 92, 96, 98, M9A1, M9A3 and non-RDO 92X Full Size (estore.beretta.com, E03809). A dovetail base is not a 90-Series RDO plate, and no fit through it is recorded here.
  2. Which 92 it is. The name on the slide or the box settles which kit list applies. The 92X RDO Compact is the short one, with a 4.25 in barrel and a 13-round magazine (Sportsman’s Warehouse), against 4.7 in and 18 rounds on the 92X RDO Full Size (Buds Gun Shop). That matters because the Compact is not on the ACRO kit list.
  3. Which plate is fitted. A plate is a raised base with its own threaded holes for an optic, held to the slide by two socket cap screws. Beretta names its kits by optic brand (Trijicon, Leupold, Burris, Docter and Vortex, C-More, ACRO), not by a mark cast on the part, so keep the kit bag. Without it, set the optic on the base: an RMR-pattern optic drops into the Trijicon base, a DeltaPoint Pro into the Leupold base. Never force a screw to make a pattern fit.
  4. Which store the plate came from. Beretta’s European store sells its 92X RDO, Defensive and M9A4 bases as a Type A (E03818) and a Type B (E03819), each listed against named optics rather than a footprint. Those bases are not recorded here. If yours says Type A or Type B, read the optic list on its own listing rather than this page.

Dimensions and screw pattern

Beretta’s 92XI and 92GTS user manual is the one first-party source that gives screw sizes for this cut (user manual).

ItemWhat Beretta publishesSource
Blanking plate screws2 screws, “socket countersunk M3X5”; the parts list gives “M3X0.5X5L screw with patch”User manual, red dot section and parts list
Plate-to-slide screws2 screws, “socket capscrews M3X6”, fitted with a 2.5 mm hex keyUser manual, installation step
Screws in each kit”Includes two Plate to Slide screws”Each 90-Series kit listing, cited below
Optic-to-plate screws”Using the RDO screws (6), fasten the sight” with “the appropriate allen wrench”; no size givenUser manual
TorquePrinted as “15 ft/lb (20.5 N•m)” for both screw setsUser manual
Cut, plate and window dimensionsNot published on these pages
Screw count and recoil boss count of the systemNot recorded; plate systems leave these empty

Two oddities are worth knowing before you pick up a wrench. The manual names a 2 mm hex key for taking the blanking plate screws out and a 2.5 mm key for putting them back, so check the key against the screw head rather than the text. And the torque line reads 15 ft/lb, which is 180 lb¡in, while the same manual gives 10 lb¡in for the grip screws. A 3 mm screw is not normally driven anywhere near 180 lb¡in, so the line reads as a unit misprint. Ask Beretta for the value before you tighten. The manual also warns that the original screws come with thread locker applied and that a loosened screw should be cleaned and re-locked.

The optic side of each plate follows the pattern it presents, so the screw spacing and boss layout live on the RMR, DeltaPoint Pro, Docter, C-More STS and ACRO hubs.

Common confusions

90-Series versus 90-Series ACRO. One cut, two kit lists. Beretta’s Docter and Trijicon kit pages list the “92X Centurion, 92GTS, 92X Compact, M9A4, M9A4 Compact, 92X Performance, M9A4 Centurion, 92X RDO Full Size, 92XI”, while its ACRO kit page lists the “92X Performance, M9A4 Centurion, 92XI, M9A4, 92X RDO Full Size, M9A4 Compact” (both quoted from the kit listings cited below). So the 92GTS and the 92X RDO Compact take every 90-Series kit except ACRO, and this site gives them no ACRO fit. A plate maker’s list is the plate’s scope.

90-Series versus APX A1. Both families have Beretta kits for the same three patterns (Trijicon, Leupold, Burris and Docter), and the APX A1 hub reaches 57 optic pages to the 92GTS’s 58. The one pattern the 92GTS has and the full-size APX A1 lacks here is C-More. Same patterns does not mean same plate: an APX base will not bolt to a 92 slide. The APX A1 Carry and 80X Cheetah kits are separate records for the same reason.

“Trijicon footprint” on the box. Beretta names the kit after the optic brand. On this site that kit is the RMR pattern, where the Holosun 507C and 407C are filed too. A Holosun 507K looks much the same and is not one: it is Holosun K, and no 90-Series kit recorded here presents it. Likewise the “Leupold footprint” kit is the DeltaPoint Pro pattern, and the “Burris/Docter/Vortex” kit is the Docter pattern used by the open Vortex Venom and the Burris FastFire 3 and 4. Watch the names: the Vortex Venom Enclosed is filed on DeltaPoint Pro, the Defender-CCW and Burris FastFire C on RMSc, and the FastFire E on ACRO, so a “Vortex” or “Burris” optic is not automatically a Docter kit optic.

Factory plates in the box. None of the five pistols here is recorded with a plate in the box. Beretta’s 92X Performance Carry Optic is a different model that Beretta lists with two Toni System plates included. It has no record here, and a Toni System plate is a third-party part, so no fit through it is published on this page.

Other 92s. Beretta’s own 92X RDO Inox listing describes a factory red dot cut with five plate options sold separately, the same count as the kits recorded across this hub and the ACRO hub. The Inox, the 92X Centurion and the M9A4 family are on Beretta’s kit lists but carry no record here yet, so no fit is published for them.

The plate paths, in words

Each optic page sits on one pattern, so the paths add without overlap. The 92GTS and 92X RDO Compact reach 35 + 16 + 6 + 1 = 58 of the 112 optic pages. The 92X Performance, 92X RDO Full Size and 92XI add the ACRO kit and reach 65, a figure only 3 pistols in the dataset share. For scale, the median across all 223 pistols here is 58.

The ACRO kit matters more than its page count suggests. Without it a 90-Series slide reaches 9 enclosed-emitter optics; with it, 16. What the system lacks is as plain: no recorded path to RMSc (34 pages) or Holosun K (6). The full optic lists sit on each pattern’s hub, and the plate rows with their sources are in the table below.

Buying guidance

  1. Pick the optic first, then the kit. The optic’s pattern names the kit: RMR-pattern optics take the Trijicon kit, DeltaPoint Pro optics the Leupold kit, Docter-pattern optics the Burris, Docter and Vortex kit.
  2. Want an enclosed emitter on a 92GTS or 92X RDO Compact? All 9 recorded for those two sit on the Trijicon and Leupold paths. The Docter and C-More kits lead to none.
  3. Want an ACRO-pattern optic? Only the 92X Performance, 92X RDO Full Size and 92XI have the recorded route, through kit EUS03054. If your 92 is not on that kit’s list, choose an enclosed optic on the RMR or DeltaPoint Pro pattern instead.
  4. Already own an RMSc or Holosun K optic? There is no recorded path for it on any 90-Series slide. Choose an optic on one of the recorded patterns, or look at a slide cut for it on the RMSc hub.
  5. Match the kit to the slide family. 90-Series, APX A1, APX A1 Carry and 80X kits are separate products, each listed by Beretta for its own slides.
  6. Budget for the plate. None of the five pistols here is recorded with a plate in the box, so an optic purchase for one of them is two purchases.

Where to go next

The footprint index compares every pattern and plate system. Do you need an adapter plate explains the plate-versus-cut split, and the most universal red dot footprint ranks the plate kits against the milled cuts. For the ACRO kit and the models it skips, read the ACRO footprint guide; for the Docter path, Docter footprint vs RMR.

Pistols with the Beretta 90-Series system ¡ 5

Plates available

Presents Plate Sources Optics that fit
C-More STS Beretta 90-Series plate kit (C-More) beretta.com 1 optic
DPP Beretta 90-Series plate kit (DPP) beretta.com 16 optics
Docter Beretta 90-Series plate kit (Docter) beretta.com 6 optics
RMR Beretta 90-Series plate kit (RMR) beretta.com 35 optics

Frequently asked

Which pistols use the Beretta 90-Series system?

5 pistols use the Beretta 90-Series plate system, including the Beretta 92GTS, Beretta 92X Performance, Beretta 92X RDO Compact and Beretta 92X RDO Full Size.

Which optics fit the Beretta 90-Series?

Its plates present the C-More STS footprint (1 optic), DPP footprint (16 optics), Docter footprint (6 optics) and RMR footprint (35 optics). Pick the plate for the footprint your optic uses.

Do I need a plate?

Yes. The Beretta 90-Series does not take an optic directly. Fit one of its plates: Beretta 90-Series plate kit (C-More), Beretta 90-Series plate kit (DPP), Beretta 90-Series plate kit (Docter) and Beretta 90-Series plate kit (RMR).

What footprint is the Beretta 92X RDO?

None. The 92X RDO slide is part of a plate system, not a footprint. Its factory cut wears a blanking plate, and the footprint comes from the Beretta 90-Series plate kit you bolt in its place. This site records kits for the Trijicon (RMR), Leupold (DeltaPoint Pro), Burris, Docter and Vortex (Docter) and C-More patterns, which together reach 58 of the 112 optic pages, plus a separate ACRO kit for some models.

Can I put an ACRO on a Beretta 92GTS?

Not on this site's records. Beretta lists its 90-Series ACRO kit (EUS03054) for the 92X Performance, 92XI and 92X RDO Full Size among the pistols here, and the 92GTS and 92X RDO Compact are not on that list. So the 92GTS reaches 58 optic pages and the three listed models reach 65. The difference is exactly the 7 ACRO pages. Check the kit's own model list before you order, because Beretta updates those lists.

Will a Holosun 507C fit a Beretta 92XI?

Yes, through Beretta's 90-Series Trijicon footprint kit (EUS03052). Every Holosun 507C and 407C page in this dataset is filed on the RMR pattern, which is what that kit presents. A Holosun 507K will not fit. It is a Holosun K optic, and no 90-Series kit recorded here presents Holosun K.

Do Beretta APX A1 optic plates fit a 92X or 92XI?

No. Beretta sells the APX A1 kits for APX slides and the 90-Series kits for 92 and M9A4 family slides, and lists each for its own pistols. The patterns overlap (both families have Trijicon, Leupold and Burris and Docter kits), but the plates are cut for different slides, so buy the kit whose listing names your pistol.

What screws hold a Beretta 92 optic plate to the slide?

Two M3x6 socket cap screws, fitted with a 2.5 mm hex key, according to Beretta's 92XI and 92GTS user manual. The blanking plate it replaces uses two M3x5 countersunk screws. Each 90-Series kit includes two plate-to-slide screws. The manual's torque figure for these screws looks like a misprint (see the dimensions section on this page), so confirm it with Beretta before you tighten anything.

Does the Beretta M9A4 take the same optic plates?

Beretta lists the M9A4, M9A4 Compact and M9A4 Centurion on its 90-Series kit pages, so the kits are sold for those slides. This site does not carry an M9A4 record yet, so it publishes no optic fit for the M9A4. The kit pages linked on this hub are the place to confirm one.