The ACRO footprint

The ACRO is a pistol optic footprint that mounts with 1 screw (dovetail_clamp). 7 red dot optics use the ACRO footprint, including the Aimpoint ACRO C-2, Aimpoint ACRO P-1 and Aimpoint ACRO P-2. It also mounts on 82 more pistols through an adapter plate.

Aimpoint ACRO P-1/P-2 enclosed-emitter pattern. NO top-down screw holes on the optic body. Fixed via a single cross-bolt clamp on the side that engages a dovetail-style groove on the mount; a perpendicular recoil stopper on the optic body engages a slot on the mount. Resembles Picatinny but is not interchangeable with it. Cross-compatible with Steiner MPS and Vector Optics Frenzy Plus, each of which uses a minor variant fitting ACRO-pattern adapters.

Footprint

ACRO

Family:
Aimpoint ACRO
Screw count:
1
Mounting:
dovetail_clamp
Optics:
7
Pistols:
2 direct · 82 via plate

Footprint specifications are compiled from manufacturer drawings and optic spec sheets.

The sections below cover what the tables on this page cannot: how to tell an ACRO mount from the pattern it is most often confused with, what this dataset does and does not publish about its geometry, which plate to ask for, and what an ACRO plate is actually worth in optics. For the wider argument about a pattern almost no slide is cut for, see the ACRO footprint guide, which this page does not repeat.

How to identify an ACRO mount without a caliper

Four checks, and the first one settles it. ACRO is the easiest pattern on this site to identify by eye, because it is the only one you identify by the absence of something.

  1. Turn the optic over and look for screw holes. There are none. An ACRO body has no top-down mounting holes at all. Every screw-through pattern in this dataset, RMR, RMSc, DeltaPoint Pro, Docter, Holosun K and C-More STS, puts two holes through the base of the optic and drives them down into the slide or the plate. ACRO does not have them, which is why no amount of comparing hole spacing will get you anywhere (optics-trade.eu).
  2. Find the single cross-bolt on the side of the body. Instead of pulling down, an ACRO clamps sideways: one bolt driven in from the flank pulls the body onto a dovetail-style groove on the mount. That is the one fastener on the optic, and it is the figure this page publishes as a screw count of 1. Read it as a clamp bolt, not as a screw you drive from above.
  3. Look for one perpendicular recoil stopper, not a ring of lugs. An ACRO body carries a single stopper that drops into a matching slot on the mount and takes the rearward load. That is the recoil lug count of 1 in the specifications above. Patterns you might be comparing it against publish 2 (RMR, Holosun K) or 4 (RMSc, DeltaPoint Pro, Docter).
  4. Read the plate listing, not the kit box. Because almost nothing is milled for ACRO, your pistol rarely tells you whether ACRO is available; the plate does. The 12 systems recorded here sell ACRO as its own plate, and the listings name the pattern in the title. Beretta’s 90-Series plate kit listing is explicit about which footprint it is (beretta.com), and so are Walther’s Gen 2 plate (waltherarms.com) and Aimpoint’s own Glock MOS plate (aimpoint.us).

The model-name rule, which is where most of the real confusion sits. An optic with ACRO in its name uses this pattern, and an Aimpoint without ACRO in its name probably does not. The next section is entirely about product lines that change footprint partway through.

Pattern and dimensions

What this dataset publishes for ACRO today:

PropertyValueSource
Mounting styleDovetail clampdataset
Fasteners on the optic body1 cross-bolt, entering from the sidedataset
Top-down mounting screws0dataset
Recoil features1 perpendicular stopper into a slot on the mountdataset
Footprint familyAimpoint ACROdataset
Optic pages on this pattern7, covering 7 SKUs from 4 brandsdataset
Pistols with a factory cut for it2 of 223, both Archon, cut chosen at purchasearchonfirearms.com
Pistols reaching it through a plate82 of 223, over 12 plate systemsdataset

ACRO publishes the only screw count of 1 anywhere in this dataset. Nine of the 42 footprint records publish 2, the Holosun 509T publishes a sourced 0, and twenty-eight plate systems and the three proprietary direct records, A-CUT, SIG-LOC Compact and SIG’s ROMEO3 MAX/XL, publish nothing at all. The lone 1 is a real measurement and it is the pattern’s signature, as long as you read it as the clamp bolt it is. The chip at the top of this page says “Screw count: 1” because that is the field name the whole site uses; on this one pattern the field is counting a bolt that enters from the flank.

Clamp jaw width, groove depth, bolt thread and stopper dimensions are not published here, for ACRO or for any other pattern on this site. No dimensioned Aimpoint drawing has been read into the dataset. The three sources recorded against this footprint are the Optics Trade write-up of the mounting standard, the OpticsPlanet footprint guide and a Gun Zone explainer (optics-trade.eu, opticsplanet.com, thegunzone.com), and the record’s own note says the mounting mechanism was checked against Aimpoint documentation through the first of those. None of the three carries a drawing. Until one does, the rule on this site is to print a null rather than a guess, so use the torque figure and the bolt that ship with your optic.

One qualitative dimension claim is worth keeping because it is the most common false start: ACRO resembles a short Picatinny section and is not interchangeable with one. The groove geometry and the stopper slot are specific to the standard, which is why a rail-like appearance on a plate is not evidence that an ACRO will clamp to it.

Look-alikes that will not interchange

ACRO against the Holosun 509T, the only other clamp pattern here. This is the pair that matters. Both are enclosed-emitter patterns, both clamp, and both look nothing like the screw-through crowd. The 509T record states the split plainly: a clamp-and-rail interface with zero screws on the optic body, similar in concept to ACRO, with different dimensions and explicitly not cross-compatible (optics-trade.eu, holosun.com). So the screw count is the field that separates them: 0 on the 509T, 1 here. The 509T pattern has 2 optic pages and is reached by 56 pistols in this dataset, all through a plate, on 8 systems: the four C&H plate families, the C&H plate for five SIG P320s, HK’s own VP9A1 plate, the Gen 2 Walther PDP plate and the Staccato HOST plate. ACRO has 7 pages and 84 pistols, 82 of them over 12 plate systems. Every pistol that reaches the 509T here reaches ACRO too, so if you want a sealed clamp-on emitter, ACRO is the one with the wider reach.

ACRO against the screw-through patterns. RMR (35 optics), RMSc (34), DeltaPoint Pro (16), Docter (6), Holosun K (6) and C-More STS (1) all mount by driving screws down through the optic. Nothing about hole spacing applies to ACRO, and no shim, longer screw or filed lug converts between them. On a plate-system pistol you do not convert: you change plates.

ACRO against a plate system. Glock MOS, S&W M&P CORE, FN 509 and the other 28 plate systems here are not footprints. A plate drops into the slide and its top face carries a footprint, which is why this site keeps 42 footprint pages of which 31 are plate systems. MOS is a plate system, not a footprint, and the plate you fit decides which optics mount.

MOS in a pistol’s name is not the MOS plate system. Two Glocks here are named MOS and reach no ACRO plate at all: the 43X MOS and the 48 MOS. Both are recorded as accepting RMSc on the slide, like any other slim Glock, and both reach 34 optic pages rather than the 100 a 19 Gen5 MOS reaches. If your Glock is a slimline, the MOS badge is about a factory cut, not about the multi-plate kit, and ACRO is not on the menu.

Three product lines that change footprint partway through

Footprint mistakes on this pattern are mostly brand mistakes. Three lines in this dataset switch mounting standard without switching product name, and all three are documented on the makers’ own pages.

Aimpoint ACRO against Aimpoint COA. Three of the four Aimpoint pages here are ACRO. The COA is not: Aimpoint’s page for it states that the slide or platform must have an A-CUT interface (aimpoint.us). This dataset files that interface as its own footprint, on the A-CUT hub, with the COA as its only optic, and no pistol page here records an A-CUT slide yet, so the COA page lists no pistol it fits. Treat an Aimpoint box as telling you the brand and nothing about the mount.

Steiner MPS against Steiner MPS-C. The MPS and its successor, the MPS 2.0, are ACRO optics. The MPS is an ACRO optic, recorded on the pattern’s cross-compatibility with the Steiner variant (steiner-optics.com). The MPS-C is an RMSc optic on Steiner’s own wording for that model, which describes an RMSc footprint engineered for slimline and subcompact pistols (steiner-optics.com). The consequence is a 51-pistol swing in what fits: the MPS and MPS 2.0 reach 84 pistols, the MPS-C reaches 135.

Burris FastFire, which spans three patterns. The FastFire E is the ACRO model, and Burris says so in the mounting line on its page (burrisoptics.com). The FastFire C is RMSc (burrisoptics.com) and reaches 135 pistols. The FastFire 3 and FastFire 4 are filed under Docter and reach 69. One line, three mounting standards, and the only one of the four that will clamp to your ACRO plate is the E.

How a plate gets you to ACRO

The plates section above lists the 12 systems and their pistol counts. What it cannot tell you is the shape of those kits, which is the part that decides what you buy.

Every pistol that reaches ACRO here also reaches RMR. On most of them the RMR plate is in the same kit; on the three Beretta 90-Series pistols it comes from Beretta’s other 90-Series kits, because Beretta lists its ACRO kit for fewer models than its RMR and Docter kits and this dataset files that kit on its own. So nobody has to pick a platform in order to get ACRO: the pattern is an addition to a slide that already carries the largest optic list on the site. It also means the opposite risk is the real one, because a kit that fits your slide proves nothing about the plate in your hand.

The 12 systems break into four kit shapes:

The sourcing behind those rows is worth knowing, because it is uneven. The Beretta, Walther, HK, Staccato and Springfield ACRO plates trace to the gun makers’ own listings (beretta.com, waltherarms.com, hk-usa.com, staccato2011.com, store.springfield-armory.com), the Glock MOS row to Aimpoint, the maker of that plate (aimpoint.us), and the S&W, FN, CZ, HK VP9 OR and SIG rows to C&H Precision’s own plate listings (chpws.com, chpws.com, chpws.com, chpws.com). The Walther PDP 1.0 row is the weakest, resting partly on a retailer guide (optics-spot.com).

ACRO and C-More STS meet in two kits. Across all 31 plate systems, 12 present ACRO and 9 present C-More STS, and two present both: Glock MOS, where Glock’s plate 03 is the C-More plate, and HK’s VP9A1 set, whose plate 03 is listed for the C-More STS2. The other C-More systems, the SIG P320 Outer Impact plates, Canik METE, Taurus TORO, the Ruger factory optic plate, Glock’s Gen6 OR plates and two Beretta families, record no ACRO plate, and 12 systems, among them Springfield XD OSP and Springfield AOS, present neither.

What an ACRO plate is worth, in optics

Here is the figure to take away: an ACRO path tells you almost nothing about how many optics a pistol reaches, because the kit around it decides that. The tiers, computed across all 84 ACRO capable pistols:

The inverse is where this gets useful as a shopping rule rather than a trivia line. 16 of the 139 pistols with no ACRO path still clear 91 optics: three Springfield XD OSP models at 97, the XD-M Elite OSP, XD-M OSP and XD Mod.3 OSP, three at 92, the Canik METE SFx PRO, the Ruger-57 and the SIG P320 XCompact, and ten at 91, the 6 Springfield 1911 AOS models, the Canik SFx Rival and Rival-S, and the CZ DUTY 4.0 C and DUTY 4.0 F. All 16 reach more optic pages than a 509 Tactical or a CORE does, and not one of them can mount a single Aimpoint. So “how many optics fit” and “does the optic I want fit” are different questions on this pattern, and the count will mislead you if you only read one of them.

Where ACRO cannot go

139 of the 223 pistols have no recorded ACRO path, and the shape of that 139 is more useful than its size. 20 of the 31 pistol brands in this dataset reach ACRO on nothing they sell, covering 71 pistols. Canik is the largest at 15 pistols, then Taurus at 14, Kimber, Tisas, SAR USA and Girsan at 5 each, Shadow Systems and Ruger at 3, and the rest in ones and twos. The other 68 come from brands that do reach ACRO on some models and not others, and those are the ones worth checking model by model: Sig Sauer reaches it on 5 of 30, Springfield Armory on 7 of 23, Beretta on 3 of 9, Smith & Wesson on 14 of 21, CZ-USA on 5 of 9, FN America on 12 of 15, Glock on 15 of 20, Heckler & Koch on 8 of 10.

Three brands are the opposite case, with every pistol in the dataset reaching ACRO: Walther (8 of 8), Staccato (5 of 5) and Archon (2 of 2). The first two sell only plate-system pistols here, which is the whole explanation for them; Archon is the one brand here that mills an ACRO cut into the slide itself, as one of its cut options. A brand’s ACRO coverage on this site is a statement about which of its slides take a plate whose maker names an ACRO plate, not a statement about the brand’s optics policy.

The near-misses divide into two reasons, and the reason changes what you can do about it. Most are milled for a pattern and have no plate pocket at all: the 43X MOS and 48 MOS, the M&P Shield Plus OR, the Hellcat family, the CSX, the HK CC9, the FN Reflex MRD and Reflex XL MRD, both recorded as Holosun K plus RMSc slides reaching 40 optics, the FN 309 MRD and twelve SIG P320s cut for DeltaPoint Pro with no ACRO plate recorded for them, and the newer direct cuts on the CZ DUTY pair and the SIG P385. For those, ACRO is not a plate away. The rest sit in a plate pocket whose plate set records no ACRO plate, among them the Springfield 1911 AOS and XD OSP models, the Beretta APX A1, APX A1 Carry and 80X, the 92GTS and 92X RDO Compact, the CZ Shadow 2 OR pair and the three Glock Gen6 models.

How to choose an ACRO optic

Compatibility is not the tiebreaker here, and that is unusual enough to say plainly. All 7 ACRO pages fit exactly the same 84 pistols, so once you own an ACRO plate, every optic on this pattern is available to you and the choice is about everything except mounting. Exactly 7 of the 112 optic pages on this site land on a fit count of 84, and they are these seven, which makes 84 an ACRO fingerprint when you are reading an optic page and wondering what pattern it is on.

What the dataset can tell you about the seven:

So the order of operations is: confirm your pistol is one of the 84 on this page (on anything but an ACRO-cut Archon, that means the plates section above), buy that system’s ACRO plate by part number, then pick among the seven on reticle, window size, battery access and price. There is no compatibility question left to answer at that last step, and there is no compatibility reason to prefer any of the seven.

What this dataset records for ACRO, and what it owes

Read this before trusting any count on this page, including ours.

All 7 ACRO optic pages are flagged verified, part of 112 of the 112 optic pages site-wide. A verified flag means the maker’s own page, or two independent pages, was read and the sentence stating the footprint is recorded against the row. The Aimpoint ACRO P-1, P-2 and C-2 are each verified against an Aimpoint product page, the Burris FastFire E against the Burris page that names the ACRO footprint in its mounting line, the Steiner MPS against Steiner’s product page and user manual, the Steiner MPS 2.0 against Steiner’s own MPS 2.0 page, which names “the widely adopted Aimpoint¼ ACRO footprint” (steiner-optics.com), and the Colt Optics MRS-1 against Colt Optics’ own product page, which says it “Mounts on the industry-standard 1.85-inch-long Acro¼ footprint” (coltoptics.com).

The three Aimpoint pages cite four source URLs between them. The ACRO P-1, P-2 and C-2 rows each cite a product page for that exact model, so none of them rests on a page about a different model. Each page also records a window size (15 x 15 mm on the P-2 and C-2, 16 x 16 mm on the P-1), which describes the optic, not the ACRO pattern. The MRS-1 and MPS 2.0 pages record no window size: Colt’s product page calls the window expansive and prints no figure, and Steiner’s MPS 2.0 page prints its 21 x 16 mm only in a specification grid without a window label, so neither is published here.

No dimensioned source exists here for the clamp geometry. See the pattern table above: the mechanism is sourced, the measurements are not published.

One cross-compatible optic named by the footprint record has no page here. The record describes ACRO as cross-compatible with the Steiner MPS, which does have a page, and the Vector Optics Frenzy Plus, which does not. No fit is claimed for the Frenzy Plus anywhere on this site, and none should be read into the footprint description.

2 of 223 pistols cut for ACRO is a fact about the pattern, not a gap. A clamp interface usually lives on a mount or plate rather than in the slide, and the only factory ACRO cuts recorded here are Archon’s, sold as one of three cut options on the Type B and Type D (archonfirearms.com). Where you should be suspicious of a zero on this site is the plate systems, twenty-eight of which publish no screw count because none was ever recorded, which is a very different thing from a measured zero.

Where to go next

The footprints index compares all 42 patterns and plate systems side by side, including the 11 true footprints and the 31 plate systems. The ACRO footprint guide carries the long argument about a pattern almost no slide is cut for. If you landed here while working out what your own pistol takes, the plate systems most likely to be yours are Glock MOS, S&W M&P CORE, FN 509 and Walther PDP 2.0, and the pistols those pages are built around include the Glock 19 Gen5 MOS, the M&P9 M2.0 C.O.R.E., the FN 509 Tactical, the Beretta 92XI, the CZ P-10 C OR, the HK VP9 OR, the Springfield Echelon and the Walther PDP Standard Compact 5”.

Optics with the ACRO footprint · 7

Pistols cut for the ACRO directly · 2

Mount it with a plate

Beretta 90-Series ACRO · 3 pistols

Via the Beretta 90-Series plate kit (ACRO). beretta.com

Show the 3 pistols
All 3 pistols with the Beretta 90-Series ACRO plate system

Walther PDP 1.0 · 1 pistol

Via the Walther PDP Gen 1 Optic Plate (ACRO). waltherarms.comoptics-spot.com

Show the 1 pistol
All 1 pistol with the Walther PDP 1.0 plate system

Frequently asked

What optics use the ACRO footprint?

7 optics use the ACRO footprint, including the Aimpoint ACRO C-2, Aimpoint ACRO P-1, Aimpoint ACRO P-2 and Burris FastFire E.

How is the ACRO footprint mounted?

The ACRO footprint uses 1 screw and a dovetail clamp mounting style. It also incorporates 1 recoil lug to resist rearward movement under firing.

Is the ACRO footprint part of a larger family?

The ACRO footprint is part of the Aimpoint ACRO family. Optics and adapter plates within the same family often share compatible mounting dimensions, which can expand which pistols and adapter solutions are available.

Which pistols take the ACRO with a plate?

82 pistols reach the ACRO through an adapter plate, using the Beretta 90-Series ACRO, CZ P-10 OR, FN 509, Glock MOS and 8 more plate systems.

Is the ACRO footprint the same as the Holosun 509T footprint?

No, and they are the two patterns most likely to be mistaken for each other, because both clamp instead of screwing through. This dataset records exactly 2 of its 42 footprint pages as clamp mounts, ACRO and the Holosun 509T, and the 509T record states the distinction in one line: the 509T body carries zero screws, while an ACRO body carries a single cross-bolt. The two interfaces are documented as similar in concept with different dimensions and no cross-compatibility. On this site 82 of the 223 pistols reach ACRO through a plate, and 2 more are cut for it directly, against 56 for the 509T pattern, all of them through a plate on 8 systems.

What plate do I need to mount an Aimpoint ACRO?

The ACRO plate for your pistol's plate system, bought as the ACRO plate specifically. 12 of the 31 plate systems here are recorded with an ACRO plate: Glock MOS (through Aimpoint's own MOS plate), S&W M&P CORE, FN 509, CZ P-10 OR, HK VP9 OR, HK VP9A1, Walther PDP 2.0 and PDP 1.0, Springfield Echelon VIS, Staccato HD HOST, the C&H plates for five SIG P320 models, and Beretta's 90-Series ACRO kit. Almost every one of those kits carries other plates as well, so a kit that fits your slide is not evidence that the plate in your hand is the ACRO one. Match the part number on the plate listing, not the kit.

Does the Aimpoint COA use the ACRO footprint?

No. Aimpoint's COA is a different interface: its own product page states that the pistol slide or platform must have an A-CUT interface to mount it. This dataset files A-CUT as its own footprint, and the COA sits on it alone; no pistol page here records an A-CUT slide yet, so the COA reaches 0 pistols on this site. Of the four Aimpoint pages here, three are ACRO: the ACRO P-1, the ACRO P-2 and the ACRO C-2. Buying an Aimpoint is not the same as buying an ACRO.

Is the Steiner MPS an ACRO footprint optic?

The Steiner MPS is, and the Steiner MPS-C is not. The MPS is recorded here on the ACRO pattern and reaches the same 84 pistols as the Aimpoint models. The MPS-C is recorded on RMSc, on Steiner's own page for that model, which calls out an RMSc footprint for slimline and subcompact pistols, and it reaches 135 of the 223 pistols. One letter separates them and it changes both the mount and the shopping list.

Which pistols are cut for the ACRO footprint?

2 of the 223 pistols in this dataset, and both are Archon: the Type B and Type D, which Archon sells with a choice of optic cut, ACRO among them, so any one pistol carries the single cut chosen at purchase. Everything else reaches ACRO through a plate: 82 of 223 get there through an adapter plate, across 12 plate systems. That is mostly a property of the pattern rather than a gap in the data, because a clamp interface usually lives on a mount or plate rather than in the slide.

How many red dots can an ACRO capable pistol take?

It depends on the kit far more than on the ACRO plate. The 36 pistols on the four C&H plate families, the S&W M&P CORE, FN 509, CZ P-10 OR and HK VP9 OR, reach 66 of the 112 optic pages here: RMR, DeltaPoint Pro, Holosun K, ACRO and Holosun 509T, 35 plus 16 plus 6 plus 7 plus 2. The 15 Glock MOS pistols reach 100 and the Gen 2 Walther PDPs and four SIG P320s reach 101, because their kits also carry RMSc and Docter. The low end is the Staccato HD HOST and the SIG P320 X-Five SXG at 60, and an Archon Type D, cut for ACRO and RMR only, at 42.