Beretta APX A1 optic footprint and plates
The Beretta APX A1 is a plate system, not an optic footprint. 2 pistols use it, and its plates present the DPP, Docter and RMR footprints.
Beretta sells a separate plate kit per footprint for its optic-ready APX A1 slides, each with its own screws. The kits recorded here present the RMR (Trijicon), DeltaPoint Pro (Leupold) and Docter (Burris/Docter) patterns. The APX A1 Carry, the 90-Series and the 80X Cheetah have their own Beretta kits and their own records.
Plate system
Beretta APX A1
- Family:
- Beretta APX A1 plate system
- Screw count:
- not recorded
- Mounting:
- proprietary_plate
- Optics:
- 0
- Pistols:
- 2
Footprint specifications are compiled from manufacturer drawings and optic spec sheets.
What the APX A1 plate system is
The full-size Beretta APX A1 is a plate system, not a footprint. Its slide is cut for a Beretta base, and the base you bolt in decides which optic mounts. Out of the box that cut wears a blank cover plate; Beretta sells the cover on its own as a kit âfor Beretta APX series pistols with milled slideâ, with the cover (part #C5H165) and its two screws (#C9A108) (beretta.com).
This site records 2 pistols on the system, the APX A1 Full Size and the APX A1 Full Size Tactical, and 3 plate paths, each cited to Berettaâs own kit listing. Beretta describes the Tactical as âred dot optic-readyâ, with a threaded barrel and suppressor height sights (beretta.com). Optic-ready here means ready for a plate, not ready for an optic: there is no recorded optic that screws to the bare slide.
How to identify an APX A1 slide and its plate
Three checks settle it without a caliper.
- Which APX it is. The plate kits on this page are for the APX A1 Full Size family. The APX A1 Carry is a different, much slimmer slide with its own kits: the Carry is recorded at 0.9 in wide against 1.3 in for the Full Size (Carry, Full Size). If your magazine holds 8 rounds, you have a Carry and belong on the APX A1 Carry hub.
- Whether the cut is closed or plated. A flat cover with two screws in the pocket ahead of the rear sight is the blank cover. A raised base with its own pair of threaded holes for an optic is a plate.
- Which plate it is. Beretta identifies each base by part number, not by a name cast on the part: #C5H023 in the Trijicon kit, #C5H022 in the Leupold kit and #C5H021 in the Burris and Docter kit (cited per kit below). If the bag or receipt is gone, set an optic on the base: an RMR-pattern optic sits in the Trijicon base, a DeltaPoint Pro in the Leupold base. Never force a screw to make a pattern fit.
Dimensions and screw pattern
| Item | What Beretta publishes | Source |
|---|---|---|
| Base to slide | Base mounts âusing the original screws from the blank cover pieceâ | Each US kit listing |
| Cover screws | 2 screws, part #C9A108 | Blank cover kit E03054 |
| Trijicon (RMR) kit | Base #C5H023 plus the optic screws | Kit E03057 |
| Leupold (DeltaPoint Pro) kit | Base #C5H022 plus 2 screws #C9A106 | Kit E03056 |
| Burris and Docter kit | Base #C5H021, 2 Burris screws #C9A104, 2 Docter screws #C9A105 | Kit E03055 |
| Thread size, screw length, torque | Not published on these pages | |
| Cut and base dimensions | Not published on these pages |
The screw count and recoil lug count are not recorded for this system, so the record leaves those fields empty rather than guessing. The optic side of each plate follows the pattern it presents, so the geometry lives on the RMR, DeltaPoint Pro and Docter hubs. Berettaâs European store lists the same Burris and Docter kit and notes that âyou can mount 2 types of red dot as the interface is the same, but only one can be mounted at a timeâ (estore.beretta.com), which is why that kit carries two screw sets.
Common confusions
APX A1 versus APX A1 Carry. The names differ by one word and the kits by everything. The full-size kits present RMR, DeltaPoint Pro and Docter; the Carry kits present RMSc, Holosun K, Docter and C-More. The full-size slide reaches 57 optic pages and the Carry 47, and the only pages both reach are the 6 Docter ones. A Carry plate on a full size slide, or the reverse, is the wrong part.
APX A1 versus the 90-Series. Berettaâs 90-Series kits (92X, 92XI, 92GTS) present the same three patterns plus C-More, and reach 58, but they are cut for a different slide. Same patterns does not mean same plate. The 90-Series ACRO kit and the 80X kits are separate records for the same reason.
âTrijicon footprintâ and âLeupold footprintâ. Beretta names its plates by optic brand. On this site the Trijicon kit is the RMR pattern, where the Holosun 507C and 407C are recorded too, and the Leupold kit is the DeltaPoint Pro pattern. A Holosun 507K looks like a 507C and is not one: it is Holosun K, and no full-size APX A1 kit here presents it.
âBurrisâ on the box. The Burris and Docter kit takes the Burris FastFire 3 and FastFire 4, both recorded on the Docter pattern. The FastFire C is recorded on RMSc and the FastFire E on ACRO, and neither has a path onto these pistols here.
Which pistols the kits cover. Berettaâs US listings name the APX A1 Full Size and APX A1 Compact; its European store says âAll APX series guns with milled slide such as APX Combat or APX RDOâ. This site carries no APX A1 Compact, APX Combat or APX RDO record, so it publishes no fit for them.
The plate paths, in words
- Trijicon kit, RMR pattern. The biggest path: 35 optic pages, and 4 of the 9 enclosed-emitter optics these pistols reach.
- Leupold kit, DeltaPoint Pro pattern. 16 optic pages, and the other 5 of the 9 enclosed ones.
- Burris and Docter kit, Docter pattern. 6 optic pages, all open emitter.
The three groups do not overlap, so they add up: 35 + 16 + 6 = 57 of the 112 optic pages, the same 57 on both pistols. For scale, the median across the 223 pistols here is 58. What the system lacks is as plain: no recorded path to RMSc (34 pages), Holosun K (6) or ACRO (7). The full lists are on each patternâs hub, and the plate rows with their sources are in the table below.
Buying guidance
- Pick the optic, then the kit. The opticâs pattern names the kit. RMR pattern optics take the Trijicon kit, DeltaPoint Pro optics the Leupold kit, Docter-pattern optics the Burris and Docter kit.
- Want an enclosed emitter? All 9 reached here sit on the RMR or DeltaPoint Pro paths. The Docter kit leads to none.
- Already own an RMSc or Holosun K optic? There is no recorded path for it on the full-size APX A1. Choose an optic on one of the three patterns instead, or look at a slide cut for it on the RMSc hub.
- Match the kit to the slide. APX A1, APX A1 Carry, 90-Series and 80X kits are separate products, each listed by Beretta for its own slide.
- Ask for an ACRO or C-More fit only once it is recorded. Beretta also lists an Aimpoint footprint kit (E03059) and a C-More footprint kit (E03058) for the APX A1. Neither is recorded here yet, so no fit through them is published.
Where to go next
The footprint index compares every pattern and plate system. Do you need an adapter plate explains the plate-versus-cut split, and the most universal red dot footprint ranks this system against the other plate kits. For the Docter path in depth, read Docter footprint vs RMR.
Pistols with the Beretta APX A1 system · 2
No pistols match your filter.
Plates available
| Presents | Plate | Sources | Optics that fit |
|---|---|---|---|
| DPP | Beretta APX A1 plate kit (DPP) | beretta.com | 16 optics |
| Docter | Beretta APX A1 plate kit (Docter) | beretta.com | 6 optics |
| RMR | Beretta APX A1 plate kit (RMR) | beretta.com | 35 optics |
Frequently asked
Which pistols use the Beretta APX A1 system?
2 pistols use the Beretta APX A1 plate system, including the Beretta APX A1 Full Size and Beretta APX A1 Full Size Tactical.
Which optics fit the Beretta APX A1?
Its plates present the DPP footprint (16 optics), Docter footprint (6 optics) and RMR footprint (35 optics). Pick the plate for the footprint your optic uses.
Do I need a plate?
Yes. The Beretta APX A1 does not take an optic directly. Fit one of its plates: Beretta APX A1 plate kit (DPP), Beretta APX A1 plate kit (Docter) and Beretta APX A1 plate kit (RMR).
What footprint is the Beretta APX A1?
None. The full-size APX A1 slide is a plate system, not a footprint. Its optic cut is closed with a blank cover, and the footprint comes from whichever Beretta plate replaces it. Beretta sells Trijicon (RMR), Leupold (DeltaPoint Pro) and Burris and Docter kits for it, and this site records those three, reaching 35, 16 and 6 optic pages: 57 of the 112 in all.
Does the Beretta APX A1 come with an optic plate?
Not as an optic plate. Beretta calls the APX A1 Full Size Tactical red dot optic-ready, but the slide wears a blank cover, and Beretta sells the plate kits separately, one per footprint, each holding a base and the screws for that footprint's optic. Buy the kit named for your optic's pattern before you buy mounting hardware anywhere else.
Will a Holosun 507C fit a Beretta APX A1?
Yes, through Beretta's Trijicon footprint kit. Every Holosun 507C and 407C page in this dataset is recorded on the RMR pattern, which is what that kit presents. A Holosun 507K will not: it is a Holosun K optic, and no full-size APX A1 kit recorded here presents Holosun K. The K kit Beretta sells is for the APX A1 Carry.
Do APX A1 Carry optic plates fit the full-size APX A1?
No. Beretta lists its Carry kits (Shield, Holosun K, Burris, Vortex and Docter, and C-More) for the APX A1 Carry only, and its full-size kits for the APX A1 Full Size and Compact. The two slides share one pattern on this site, Docter, and only 6 optic pages sit on it; of the 57 pages the full-size slide reaches and the 47 the Carry reaches, those 6 are the whole overlap.
Can I put an RMSc or ACRO optic on a Beretta APX A1?
Not on this site's records. No full-size APX A1 kit recorded here presents RMSc (34 optic pages) or ACRO (7). Beretta does list an Aimpoint footprint kit for the APX A1, which its European store describes as Aimpoint ACRO, but it is not yet recorded here, so no ACRO fit is published for these pistols. Check that kit's listing before ordering.
What screws hold a Beretta APX A1 optic plate?
Two sets. Beretta's US kit listings say the base goes onto the slide with the original screws from the blank cover, and each kit adds the screws that hold your optic to the base. The Burris and Docter kit ships two optic screw sets, one per brand, because the interface is the same. Beretta publishes no thread size or torque value on these pages.