HK VP9 OR optic footprint and plates
The HK VP9 OR is a plate system, not an optic footprint. 5 pistols use it, and its plates present the ACRO, DPP, Holosun 509T, Holosun K and RMR footprints.
The VP9 OR family (VP9, VP9 Match, VP9 Tactical OR, VP9L OR, VP9SK) uses the HK 2020 V4 MIL/LEO plate interface instead of a dedicated optic cut. C&H Precision plates for it present the RMR, DeltaPoint Pro, ACRO, Holosun K (407K/507K, plus a separate plate for the EPS and EPS Carry) and Holosun 509T patterns. The VP9A1 models carry HK's own numbered plates and have their own record.
Plate system
HK VP9 OR
- Family:
- HK VP9 OR (HK 2020 V4 MIL/LEO) plate system
- Screw count:
- not recorded
- Mounting:
- proprietary_plate
- Optics:
- 0
- Pistols:
- 5
Footprint specifications are compiled from manufacturer drawings and optic spec sheets.
What the HK VP9 OR plate system is
The HK VP9 OR is a plate system, not a footprint. An optics-ready VP9 slide leaves the factory with a flat cover plate in its cut, and HK’s operator’s manual for the VP series describes the swap in three steps: remove the cover plate, set “suitable adapter plate on mounting for adapter plate”, then screw the red dot to that plate (hk-usa.com). Nothing about the slide names an optic pattern. The plate does.
This site records 5 pistols on the system: the VP9 OR, VP9 Match, VP9 Tactical OR, VP9L OR and VP9SK OR. It records 5 plate paths, all from C&H Precision, whose HK VP9 page lists the whole range for the slide (chpws.com), and each of the five pistols reaches the same 66 optic pages. C&H names the interface “HK 2020 VP9 V4 MIL / LEO” in its plate titles; HK’s own model pages, such as the VP9 Match, sell the guns as Optics Ready.
How to tell a VP9 OR slide, and which plate is on it
- Read the model name, not the frame. HK sells the VP9 with and without the cut, and the newer VP9A1 line carries a cut too. The five pistols here are the ones C&H lists on every VP9 plate page: “HK VP9, HK VP9 Match, HK VP9 Tactical OR, HK VP9L OR, HKVP9SK” (chpws.com). A gun marked VP9A1 is a different record (see below).
- Tell the five apart by barrel. HK’s spec pages give 3.39 in for the VP9SK, 4.09 in for the VP9, 4.70 in for the threaded VP9 Tactical OR, 5 in for the VP9L OR and 5.51 in for the VP9 Match. For plate purposes it does not matter which: C&H sells one plate per optic for all five.
- Cover or adapter. HK’s manual treats them as two parts: the cover plate closes the cut, and an adapter plate goes in its place and takes the optic. If nothing can be screwed to the top of the slide, it is the cover.
- Which adapter. C&H prints a SKU on each listing: HK-RSH for RMR, HK-DPP/EFLX for DeltaPoint Pro, HK-HOLOk for the 407K and 507K, HK-EPS for the EPS, HK-ACRO-XL-ST for ACRO and HK-509T-ST for the 509T. Without the packet, the material narrows it: C&H makes the ACRO and 509T plates in black-painted mild steel and the other four in hard-anodized 6061 aluminum. A plate stamped with an HK number from 01 to 05 is HK’s own (see “HK’s own plates” below).
Dimensions and screw pattern
| C&H plate (SKU) | Plate to slide | Optic screws in the box | Material | Source |
|---|---|---|---|---|
| RMR (HK-RSH) | 3 x M4 x 6 mm | 4-40 in five lengths, .250 to .370, by optic | 6061 aluminum, T-nuts | C&H |
| DeltaPoint Pro and EFLX (HK-DPP/EFLX) | 3 x M4 x 6 mm | 4-40 x .560 (DPP), 4-40 x .345 (EFLX) | 6061 aluminum, T-nuts | C&H |
| Holosun K (HK-HOLOk) | 3 x M4 x 6 mm | 4-40 x .345 | 6061 aluminum, T-nuts | C&H |
| EPS and EPS Carry (HK-EPS) | 3 x M4 x 6 mm | 4-40 x .320 | 6061 aluminum, T-nuts | C&H |
| ACRO (HK-ACRO-XL-ST) | 3 x M4 x 6 mm | none listed | Mild steel | C&H |
| Holosun 509T (HK-509T-ST) | 3 x M4 x 8 mm | none listed | Mild steel | C&H |
| Torque value, cut depth, pocket dimensions | Not published on these pages |
The slide side is M4 throughout, and it agrees with HK. The manual specifies “suitable screws (M4 x 8) of quality class 12.9 with screw locking” for HK’s own adapter plates, sold as Ident.-No. 50947116, with a caution to “Replace the adapter plate screws with new screws after 2,000 rounds”. It calls for a torque wrench in the 2 to 10 Nm range but the text read for this hub gives no single value, and C&H’s pages give none either, so none is printed here. The optic side follows the pattern each plate presents, and that geometry lives on the pattern’s own hub: RMR, DeltaPoint Pro, Holosun K, ACRO and Holosun 509T. The record leaves screw count and recoil lug count empty for the system itself, because a plate system has neither of its own.
Common confusions
VP9 OR versus VP9A1. The most expensive mistake on this page. The VP9A1 F, K and X Tactical have their own record built from HK’s own plate list, nine plates from 01 to 07 plus an EPS and a 509T plate (hk-usa.com), and a VP9A1 F reaches 91 optic pages to this system’s 66. The two share 50. The A1 adds 41, the 34 RMSc pages through HK’s Shield plate, the 6 Docter pages and the one C-More STS page. The VP9 OR adds 16, every one a DeltaPoint Pro pattern optic, because C&H makes a DeltaPoint Pro plate for it and the A1 record has no plate recorded as presenting that pattern. No C&H VP9 plate page read for this hub lists the VP9A1, so this site does not publish either plate set as fitting the other gun.
HK’s own plates. HK sells five numbered plates for the original optics-ready VP, and its manual lists them: “Plate 01 - Meopta MeoSight III, EOTech MRDS and Noblex Sight III”, “Plate 02 - Trijicon RMR, Holosun”, “Plate 03 - C-More STS2”, “Plate 04 - Leupold DeltaPoint” and “Plate 05 - Buris Fastfire 2 & 3, Vortex Viper & Venom”. HK Parts Pro, an HK distributor, sells them by HK part number, from “Mounting Plate #1, VP OR” (hkpartspro.com) to #5 (hkpartspro.com). None of the five is recorded on this hub yet, so no fit through an HK plate is published here, and the optics HK names for plates 01, 03 and 05 count only where a C&H plate also reaches them. Note that HK writes “Leupold DeltaPoint”, not DeltaPoint Pro.
The HK CC9. A different HK, a different idea. The CC9 is milled for RMSc directly, with no plate, and reaches 34 pages, none of them among the VP9 OR’s 66. The two HKs share no optic on this site.
The same C&H set on other slides. C&H sells these five patterns for the FN 509, the CZ P-10 OR and the S&W M&P CORE too, and each of those reaches the same 66 pages. The patterns match; the slide pockets do not. Order by pistol first.
K plate versus EPS plate. Both present the Holosun K pattern here. C&H sells them as separate VP9 plates, one for the 407K and 507K, one for the EPS and EPS Carry, with different screw lengths.
509T versus 509 ACSS Vulcan. C&H’s VP9 509T plate says it “will not work with the Holosun HE509-RD ACSS Vulcan”.
The Trijicon RCR and the Steiner MPS. The record counts the RCR on the RMR path and the MPS on the ACRO path. C&H’s VP9 RMR plate page says “THIS PLATE WILL NOT WORK WITH THE TRIJICON RCR”, and C&H’s VP9 ACRO plate lists the Aimpoint ACRO, ACRO P1 and P2, C&H Duty and Colt MRS-1 but not the MPS, which has its own VP9 plate (chpws.com). Pair either optic with C&H’s word, not with the count.
The plate paths, in words
- RMR plate, 35 optic pages. The widest door: Trijicon RMR and SRO, the Holosun 407C, 507C, 507Comp and 508T, and the rest of the RMR pattern, 4 of them enclosed.
- DeltaPoint Pro plate, 16 pages. Leupold DeltaPoint Pro and EOTech EFLX by name, plus the other DeltaPoint Pro pattern sights, 5 of them enclosed. This is the path the VP9A1 record does not have.
- Holosun K plates, 6 pages. Split across the K plate and the EPS plate, 4 of them enclosed.
- ACRO plate, 7 pages, all enclosed.
- Holosun 509T plate, 2 pages, both enclosed.
The patterns do not overlap, so 35 + 16 + 6 + 7 + 2 = 66 of the 112 optic pages, from 16 brands, 22 of them enclosed-emitter. All 66 are flagged verified against their maker’s page; across the site the figure is 112 of the 112 optic pages. The 46 pages the system does not reach are mostly the 34 RMSc and 6 Docter pages: no recorded VP9 OR plate presents either.
Buying guidance
- Budget for a plate. HK’s manual says the plates are “Not included with VP Optic Ready”. The gun arrives with a cover plate only.
- Choose the optic, then the plate that names it. One plate per pattern, and on the K pattern one plate per optic family.
- Want an enclosed emitter? 22 of the 66 are. The ACRO and 509T plates lead only to enclosed sights; every other path carries both kinds.
- Own an RMSc micro? No recorded VP9 OR plate presents it. HK’s VP9A1 record does, and so does the CC9’s direct cut.
- Plan on fresh plate screws. HK’s 2,000-round replacement interval is written for its own plates; ask C&H what it recommends for its own.
- Check sight height. C&H’s plate pages warn that co-witness depends on the pistol, plate, optic and cut together. HK Parts Pro’s VP9 Tactical OR listing describes suppressor-height tritium sights that give “a day or night lower 1/3 co-witness”, so that model already accounts for it.
Where to go next
The footprint index compares every pattern and plate system. Do you need an adapter plate covers the plate-versus-cut question across the dataset, and the most universal red dot footprint ranks systems by reach. For the same five C&H patterns on another slide, read the FN 509 optic plate guide; for the K and EPS split, Holosun K vs RMSc.
Pistols with the HK VP9 OR system · 5
- Heckler & Koch VP9 Match
- Heckler & Koch VP9 OR (Optics Ready)
- Heckler & Koch VP9 Tactical OR
- Heckler & Koch VP9L OR
- Heckler & Koch VP9SK OR
No pistols match your filter.
Plates available
| Presents | Plate | Sources | Optics that fit |
|---|---|---|---|
| ACRO | C&H Precision HK VP9 plate (ACRO) | chpws.com | 7 optics |
| DPP | C&H Precision HK VP9 plate (DPP) | chpws.com | 16 optics |
| Holosun 509T | C&H Precision HK VP9 plate (Holosun 509T) | chpws.com | 2 optics |
| Holosun K | C&H Precision HK VP9 plate (Holosun K) | chpws.comchpws.com | 6 optics |
| RMR | C&H Precision HK VP9 plate (RMR) | chpws.com | 35 optics |
Frequently asked
Which pistols use the HK VP9 OR system?
5 pistols use the HK VP9 OR plate system, including the Heckler & Koch VP9 Match, Heckler & Koch VP9 OR (Optics Ready), Heckler & Koch VP9 Tactical OR and Heckler & Koch VP9L OR.
Which optics fit the HK VP9 OR?
Its plates present the ACRO footprint (7 optics), DPP footprint (16 optics), Holosun 509T footprint (2 optics), Holosun K footprint (6 optics) and RMR footprint (35 optics). Pick the plate for the footprint your optic uses.
Do I need a plate?
Yes. The HK VP9 OR does not take an optic directly. Fit one of its plates: C&H Precision HK VP9 plate (ACRO), C&H Precision HK VP9 plate (DPP), C&H Precision HK VP9 plate (Holosun 509T), C&H Precision HK VP9 plate (Holosun K) and 1 more.
What footprint does the HK VP9 OR use?
None. The HK VP9 OR is a plate system, not a footprint: the slide takes a cover plate or an adapter plate, and the adapter plate decides the optic. This site records five C&H Precision plate paths for it (RMR, DeltaPoint Pro, Holosun K, ACRO and Holosun 509T), which reach 66 of the 112 optic pages here.
Does the VP9 OR come with an optic plate?
No. HK's VP series operator's manual lists plates 01 to 05 under the heading "Optic Plate options (Not included with VP Optic Ready)". The pistol ships with a cover plate in the cut, so budget for a plate with the optic.
What plate do I need to put an RMR or Holosun 507C on a VP9?
An RMR-pattern plate. C&H's HK VP9 RMR plate (SKU HK-RSH) names the Trijicon RMR, Holosun 407C, 507C, 507Comp and 508T and ships five lengths of 4-40 optic screws for them. HK's own plate 02 is listed for the Trijicon RMR and Holosun, but it is not recorded on this site yet.
Will VP9A1 optic plates fit a VP9 OR?
This site does not say they do. The VP9A1 F, K and X Tactical are a separate record with HK's own nine-plate list, and every C&H VP9 plate page read for this hub names the VP9, VP9 Match, VP9 Tactical OR, VP9L OR and VP9SK without naming the VP9A1. Treat them as two systems until HK says otherwise.
Can I mount a Holosun 507K or EPS Carry on a VP9SK?
Yes, through C&H's K-pattern plates. C&H sells one VP9 plate for the Holosun 407K and 507K and a separate one for the EPS and EPS Carry, and both list the HKVP9SK. The 6 Holosun K pages on this site are split between those two plates, so buy the one that names your optic.
What screws and torque does a VP9 OR plate use?
HK's manual calls for M4 x 8 screws of quality class 12.9 with thread locker for its own adapter plates, orderable as HK Ident.-No. 50947116, and says to replace them after 2,000 rounds. C&H ships three M4 x 6 mm plate screws with most of its VP9 plates and M4 x 8 mm with the 509T plate. Neither the manual text nor the C&H pages read for this hub state a torque value.