CZ P-10 OR optic footprint and plates
The CZ P-10 OR is a plate system, not an optic footprint. 5 pistols use it, and its plates present the ACRO, DPP, Holosun 509T, Holosun K and RMR footprints.
CZ P-10 optic-ready slides take an optic through a C&H Precision V4 MIL/LEO plate rather than a factory footprint cut. C&H lists its P-10 plates for the P-10 C, F, F 45 and S, presenting the RMR, DeltaPoint Pro, ACRO, Holosun K (407K/507K, plus a separate plate for the EPS and EPS Carry) and Holosun 509T patterns. The Shadow 2 OR has its own C&H plates and its own record.
Plate system
CZ P-10 OR
- Family:
- CZ P-10 OR plate system (C&H Precision)
- Screw count:
- not recorded
- Mounting:
- proprietary_plate
- Optics:
- 0
- Pistols:
- 5
Footprint specifications are compiled from manufacturer drawings and optic spec sheets.
What the CZ P-10 OR plate system is
The CZ P-10 OR is a plate system, not a footprint. CZ describes the P-10 C OR as coming âwith a modified slide for easy attachment of a red dot sightâ (czfirearms.com), and the P-10 F OR SR as carrying âan innovative CZ interface for mounting a red dot sightâ (czfirearms.com). Neither page names a footprint, because the slide does not carry one. What sits on the slide is a plate, and the plate decides the optic.
This site records 5 pistols on the system, the P-10 C OR, P-10 C Ported, P-10 F OR, P-10 F Competition-Ready and P-10 S OR, and 5 plate paths, each cited to the plate maker, C&H Precision, whose CZ P-10 page lists its whole plate range for the slide (chpws.com). All five pistols reach the same 66 optic pages. CZ also sells its own parts for the pocket: a P-10 slide cover (shop.cz-usa.com) and an âOptic Adapter Plate 2, P-10 Optic-Ready, DPP Cutâ (shop.cz-usa.com), which lists the Leupold DeltaPoint Pro, Vortex Defender XL and ST, SIG ROMEO-X PRO and EOTech EFLX. That CZ plate presents the same pattern as the recorded C&H DeltaPoint Pro plate, so it opens no optic the record does not already reach.
How to identify a P-10 OR slide and its plate
Four checks settle it without a caliper.
- The model name says OR, Ported or Competition-Ready. CZ sells the P-10 with and without the cut. The OR models, the C Ported (âan Optics-Ready interfaceâ, czfirearms.com) and the F Competition-Ready are the ones recorded here. A P-10 without the optics-ready cut takes no plate at all.
- Which frame it is. C&H lists its plates by frame: P-10 C, P-10 F, P-10 F 45 and P-10 S, plus a âCZ P-10 V4 MIL / LEOâ entry. The pistol records use CZâs model names, so read the frame off the barrel and grip: the S is the 3.5 in subcompact with a 12+1 magazine, the C OR a 4 in compact at 15+1, the F OR a 4.5 in full size at 19+1 with a 1/2 x 28 threaded barrel, and the Competition-Ready a 5 in full size whose barrel and slide are âa half-inch longerâ (czfirearms.com).
- Cover or plate. A flat cover in the pocket means no optic plate is fitted; CZ sells that cover as its own part. A plate stands proud of the slide and carries its own threaded holes for the optic.
- Which plate. C&H identifies its P-10 plates by SKU on each listing: CZ-RSH-ST for the steel RMR plate, CZ-DPP/EFLX for DeltaPoint Pro, CZ-HOLOk for Holosun K, CZ-EPS for the EPS and EPS Carry, CZ-ACRO-XL-ST for ACRO and CZ-509T-ST for the 509T (each cited in the table below). With the receipt gone, check the material: the RMR, ACRO and 509T plates are steel, the DeltaPoint Pro, K and EPS plates are black anodized aluminum.
Dimensions and screw pattern
| Plate | Plate to slide | Optic screws in the box | Material | Source |
|---|---|---|---|---|
| RMR (steel) | 3 x M3 x 6 mm | 6-32, four lengths (.250 to .365) by optic | Mild steel | C&H |
| DeltaPoint Pro and EFLX | 3 x M3 x 6 mm | 4-40 x .560 (DPP), 4-40 x .354 (EFLX) | 6061 aluminum | C&H |
| Holosun K | 3 x M3 x 6 mm | 4-40 x .345 | 6061 aluminum | C&H |
| EPS and EPS Carry | 3 x M3 x 6 mm | 4-40 x .320 | 6061 aluminum | C&H |
| ACRO | 3 x M3 x 6 mm | none listed | Mild steel | C&H |
| Holosun 509T | 3 x M3 x 8 mm | none listed | Mild steel | C&H |
| Torque, cut depth, pocket dimensions | Not published on these pages |
So the slide side of the system is the same on every plate: three M3 screws into the P-10 pocket. Only the 509T plate needs the longer 8 mm screw. The optic side follows the pattern each plate presents, and its geometry lives on that patternâs hub: RMR, DeltaPoint Pro, Holosun K, ACRO and Holosun 509T. The record leaves the screw count and recoil lug count empty for the system itself rather than inventing one. The aluminum plates use C&Hâs replaceable stainless T-nuts, which C&H says give âsix to seven threads of engagementâ.
Common confusions
P-10 OR versus Shadow 2 OR. Both are CZ optics-ready slides and both take C&H plates, but they are different cuts. The Shadow 2 OR has its own record with one RMR-pattern plate and reaches 35 optic pages; every one of those 35 is inside the P-10âs 66. A Shadow 2 plate does not fit a P-10, or the reverse.
P-10 versus the CZ DUTY. The DUTY 4.0 C is cut directly for RMR, DeltaPoint Pro, Holosun K and RMSc, with no plate, and reaches 91 pages. The two share 57 of them. The DUTY adds the 34 RMSc pages; the P-10 adds the 9 it reaches through its ACRO and 509T plates.
The same plate set on other brands. C&H sells the same five patterns for the FN 509, the HK VP9 OR and the S&W M&P CORE, and each reaches the same 66 pages. Same patterns, different slide pockets: a plate is bought for the pistol first and the optic second.
K plate versus EPS plate. Both present the Holosun K pattern in this record, but C&H sells them apart: one for the 407K and 507K, one for the EPS and EPS Carry. The 6 Holosun K pages are split between them, so pick the plate that names your optic.
509T versus 509 ACSS. C&Hâs 509T plate says it âwill not work with the Holosun HE509-RD ACSS Vulcanâ, and C&H sells a separate plate for the Primary Arms 509 ACSS, which it says is âNOT MEANT TO FIT THE STANDARD HOLOSUN 509Tâ (chpws.com). That second plate is not recorded here.
The Trijicon RCR. The record carries the RCR on the RMR pattern, and the RMR path counts it. C&Hâs steel P-10 RMR plate names the RCR in its title, yet the same page, and C&Hâs aluminum P-10 RMR plate (chpws.com), says âTHIS PLATE IS NOT COMPATIBLE WITH THE Trijicon RCRâ. Ask C&H before pairing the two.
The plate paths, in words
- RMR plate. The largest path, 35 optic pages: Trijicon RMR and SRO, the Holosun 407C, 507C and 508T, and the rest of the RMR pattern.
- DeltaPoint Pro plate. 16 pages, the Leupold DeltaPoint Pro and EOTech EFLX named on the plate itself.
- Holosun K plates. 6 pages, across the K plate and the EPS plate.
- ACRO plate. 7 pages, every one of them enclosed. C&H lists the Aimpoint ACRO, ACRO P1 and P2 on it, and sells a separate P-10 plate for the Steiner MPS (chpws.com), so confirm the plate before ordering for an MPS.
- Holosun 509T plate. 2 pages, both enclosed.
The patterns do not overlap, so 35 + 16 + 6 + 7 + 2 = 66 of the 112 optic pages, from 16 brands, 22 of them enclosed-emitter. The 46 the system does not reach are mostly the 34 RMSc and 6 Docter pages: no P-10 plate recorded here presents either. All 66 are flagged verified against their makerâs page, and across the site that figure is 112 of the 112 optic pages.
Buying guidance
- Pick the optic, then the plate. The opticâs pattern names the plate. One plate per optic family; the P-10 takes none of them without one.
- Want an enclosed emitter? 22 of the 66 pages are enclosed. The ACRO and 509T plates lead only to enclosed sights; the RMR and DeltaPoint Pro plates carry both kinds.
- Already own an RMSc or Docter pattern optic? There is no recorded plate for it on the P-10. Choose an optic on one of the five patterns, or a CZ with a direct RMSc cut such as the DUTY.
- Buy the plate for the slide, not the brand. C&Hâs FN, HK and S&W plates present the same patterns and do not fit the CZ pocket.
- Check iron sight height. C&Hâs plate pages warn that co-witness depends on the pistol, plate, optic and cut together; CZ calls the P-10 S sights âHigher (cowitness)â (czfirearms.com), so the S is the model that already accounts for it.
- Ask about plates C&H lists that are not recorded yet. C&H also lists P-10 plates for the SIG ROMEO-X PRO, Trijicon RMRcc, Steiner MPS, the Primary Arms 509 ACSS and a shrouded C&H COMP. None is recorded here, so no fit through them is published.
Where to go next
The footprint index compares every pattern and plate system. Do you need an adapter plate explains the plate-versus-cut split, the most universal red dot footprint ranks plate systems by reach, and the FN 509 optic plate guide walks through the same five C&H patterns on another slide. For the K and EPS split in depth, read Holosun K vs RMSc.
Pistols with the CZ P-10 OR system · 5
- CZ-USA P-10 C OR
- CZ-USA P-10 C Ported
- CZ-USA P-10 F Competition-Ready
- CZ-USA P-10 F OR
- CZ-USA P-10 S OR
No pistols match your filter.
Plates available
| Presents | Plate | Sources | Optics that fit |
|---|---|---|---|
| ACRO | C&H Precision CZ P-10 plate (ACRO) | chpws.com | 7 optics |
| DPP | C&H Precision CZ P-10 plate (DPP) | chpws.com | 16 optics |
| Holosun 509T | C&H Precision CZ P-10 plate (Holosun 509T) | chpws.com | 2 optics |
| Holosun K | C&H Precision CZ P-10 plate (Holosun K) | chpws.comchpws.com | 6 optics |
| RMR | C&H Precision CZ P-10 plate (RMR) | chpws.com | 35 optics |
Frequently asked
Which pistols use the CZ P-10 OR system?
5 pistols use the CZ P-10 OR plate system, including the CZ-USA P-10 C OR, CZ-USA P-10 C Ported, CZ-USA P-10 F Competition-Ready and CZ-USA P-10 F OR.
Which optics fit the CZ P-10 OR?
Its plates present the ACRO footprint (7 optics), DPP footprint (16 optics), Holosun 509T footprint (2 optics), Holosun K footprint (6 optics) and RMR footprint (35 optics). Pick the plate for the footprint your optic uses.
Do I need a plate?
Yes. The CZ P-10 OR does not take an optic directly. Fit one of its plates: C&H Precision CZ P-10 plate (ACRO), C&H Precision CZ P-10 plate (DPP), C&H Precision CZ P-10 plate (Holosun 509T), C&H Precision CZ P-10 plate (Holosun K) and 1 more.
What footprint does the CZ P-10 OR use?
None of its own. The CZ P-10 OR is a plate system, not a footprint: the slide has a CZ optics-ready pocket, and the plate screwed into it decides which optic mounts. This site records five C&H Precision plates for it, presenting RMR, DeltaPoint Pro, ACRO, Holosun K and Holosun 509T, which reach 66 of the 112 optic pages here.
What optic plate do I need for a CZ P-10 C OR?
The plate named for your optic's pattern. An RMR, SRO or Holosun 507C takes the C&H RMR plate, a DeltaPoint Pro or EOTech EFLX the DeltaPoint Pro plate, a Holosun 407K or 507K the K plate, an EPS or EPS Carry the separate EPS plate, an Aimpoint ACRO the ACRO plate and a Holosun 509T the 509T plate. C&H lists every one of them for the P-10 C, F, F 45 and S.
Will a Holosun 507C fit a CZ P-10?
Yes, on the RMR plate. C&H's P-10 RMR plate lists the Holosun 407C, 507C, 507Comp and 508T next to the Trijicon RMR and SRO, and ships separate screw lengths for each family. A Holosun 507K is a different optic on a different pattern and needs the K plate instead.
Can I put an RMSc optic on a CZ P-10 OR?
Not on this site's records. No plate recorded for the P-10 OR presents RMSc, so none of the 34 RMSc optic pages is published as a fit, and the same holds for the 6 Docter pattern pages. If an RMSc optic is the requirement, the CZ DUTY is the CZ in this dataset whose slide is cut for it directly.
Does the CZ P-10 S take the same optic plates as the P-10 C?
Yes, as far as C&H lists them. Every C&H P-10 plate page read for this hub names the P-10 C, P-10 F, P-10 F 45 and P-10 S together, so the subcompact and the full size share one plate set. The optic still has to suit the slide: CZ describes the P-10 S as cut for appropriately sized red dot sights.
What screws hold a CZ P-10 optic plate to the slide?
Three M3 flat-head screws on every C&H P-10 plate read for this hub: M3 x 6 mm on the RMR, DeltaPoint Pro, K, EPS and ACRO plates, M3 x 8 mm on the 509T plate. The optic screws then depend on the optic, from 6-32 on the steel RMR plate to 4-40 on the aluminum DeltaPoint Pro, K and EPS plates. C&H publishes no torque value on these pages.